Showing all 948 papers.
The reference interval calculations were carried out using Analyse‐it for Microsoft Excel 5.90 (Analyse‐it Software Ltd, West Yorkshire, UK), and the statistical analyses were carried out using SPSS 31.0 (SPSS, New York, USA).
Statistical Analysis Statistical analysis was conducted using the Analyse-it software (version 6.15.4) for Microsoft Excel (Analyse-it Software Ltd., Leeds, UK), with the significance level set at p < 0.05.
Statistical analyses were performed using Microsoft Excel 2010 (Microsoft, Seattle, WA, USA) and Analyse-it for Microsoft Excel Method Evaluation Edition version 3.70.1 (Analyse-it, UK).
For method comparison with LC-MS/MS, Passing–Bablok regression analysis was performed using Analyse-it for Microsoft Excel (Analyse-it Software, Ltd., Leeds, UK).
Data management and statistical analyses were conducted using the Stata Statistical Software: Release 14 (Stata Corp LP, College Station, TX, USA) and the Analyse-it software package for Excel 2016 (Analyse-it Software, Ltd., Leeds, UK).
For all other statistics calculations and for plotting the graphs Microsoft Excel and Analyse-it for Microsoft Excel (version 6.15.4) were used.
Statistical analysis was performed using Analyse-It V.5.80 (Analyse-It Software).
All analyses were performed using Analyse-it Software version 5.96 (Analyse-it Software, Ltd., Leeds, UK).
…were performed in accordance with the CLSI EP09-ED3 guideline [ 12 ] and ICSH recommendations [ 1 ], using the Analyse-it statistical software v6.16.2 (Analyse-it Software, Ltd., Leeds, UK) as an Excel add-in.
Analyses were performed using Analyse-it (Analyse-it Software Ltd., Leeds, UK) in Excel (Microsoft Corp., Redmond, WA, USA).
All statistical analyses were performed using Microsoft Excel 2016 with the Analyse-it add-in (Microsoft, Redmond, WA, USA) and R version 4.3.1 (R Foundation for Statistical Computing, Vienna, Austria).
Statistical Analysis Statistical analysis was performed using Analyse‐it software (6.15).
Rule out rates and diagnostic performance were calculated using Analyse-it version 5.90 (Analyse-it Software, Ltd (2021)) for Microsoft ® Excel ® for Microsoft 365 MSO (Version 2508).
Statistical analysis was performed using Analyse‐it for Microsoft Excel (v.6.15.4, 2024; Microsoft Office 2021).
Statistical analysis Statistical analysis and difference plotting were performed using Analyse-it Ultimate Edition 5.80.2 (Analyse-it Software, Ltd., Leeds, United Kingdom).
Data analyses were conducted using Analyse-it Standard Edition for Microsoft Excel (version 2.0) (Analyse-it Software Ltd., Leeds, UK) and R studio (version 2.0) (R Core Team, Vienna, Austria).
Statistical Analysis Data analyses were performed using IBM SPSS Statistics v26.0 (IBM Corp., Armonk, NY, USA), Analyse-it v6.16.2 (Analyse-it Software, Ltd., Leeds, UK), and GraphPad Prism v9.0 (GraphPad Software, San Diego, CA, USA).
All analyses were performed using Analyse‐it Software version 5.96 (Analyse‐it Software Ltd., United Kingdom).
All analyses were performed using Analyse-it Version 6.15 software as an Add-on to Microsoft Excel (Analyse-it Software Ltd., Leeds, UK), integrated with Microsoft Excel and IBM SPSS Statistics, version 31 (IBM Corp., Armonk, NY, USA).
20 Other calculations used Systat (Systat Software, San Jose, CA), Analyse-It (v.
Analyses were performed with the Analyse-it software.
Analyses were performed with Analyse-it ® for Microsoft ® Excel, Ultimate Edition v6.16.2 (Analyse-it Software Ltd., Leeds, UK).
All performance characteristics and 95% confidence intervals (CIs) calculated using the Wilson method were determined using Analyse-it (Analyse-It Software, Ltd., United Kingdom).
Statistical analysis Data analysis was conducted using Analyse-it (v5.11) and Excel 2013 software 16 .
Statistical analysis was performed using Analyse-it for Microsoft Excel version 2.30 (Analyse-it Software, Leeds, UK).
Statistical analysis Excel-Analyse-it software (Microsoft ® ; version 2503) and the bioRender Graph online application (Biorender ® , Toronto, Ontario,…
Statistical Analysis The data obtained from the study were analyzed using Analyse-it Software (Analyse-it Software Ltd.
Estimates, 95% CI, and figures were produced using Analyse‐it, version 6.15 for Microsoft Excel; Stata MP, version 18; and the R language and environment for statistical…
All calculations for the Ordinary Deming Regression were performed using Analyse-it (Analyse-it Software, Leeds, UK).
Statistical analysis was performed using an Excel spreadsheet and a specific software (Analyse-it v.
Statistical Analysis The statistics of the control group were generated using the Analyse-it (version 6.15, Analyse-it Software Ltd., Leeds, UK), an add-in for Microsoft Excel (version 2021, Microsoft Corporation, Redmond, WA, USA).
…(Microsoft Corporation, Redmond, WA, USA), a supplemental file provided by the IFCC working group [ 20 ], and Analyse-it (Analyse-it Software, Ltd., Leeds, UK) programs were used for statistical analysis.
Analyse-it for Microsoft Excel, Ultimate Edition v6.15.4 or newer versions (Analyse-it Software Ltd., Leeds, UK, 04/18/2023) 9.
Statistical analysis Statistical analyses were performed with Excel (Microsoft, Redmond, USA) and Analyse-It (Analyse-It for Microsoft Excel 6.15.4, build 8349.332216, Redmond, USA).
Statistical analysis Statistical analysis was carried out using Analyse-it for Microsoft Excel 5.68 (Analyse-it Software Ltd, Leeds, UK) and Prism 8.0 (GraphPad Software, Inc, La Jolla, CA, USA).
Statistical analyses were performed using Analyse-it version 5.81 for Microsoft Excel (Analyse-it Software, Leeds, UK) and R version 4.4.3 (R Foundation for Statistical Computing, Vienna, Austria).
Normality was assessed using the Shapiro-Wilk test (Analyse-it Ltd., Leeds, UK).
Statistical analyses were performed using the SPSS software (SPSS Inc., Chicago, IL), and AUROC analysis was conducted using the Analyse-It software (Analyse-it Software, Ltd., Leeds, UK) [ 21 , 22 ].
2.4 Statistics Comparison of performance characteristics for the 3‐Screen using serum and DBS samples was calculated using Analyse‐it in Microsoft Excel.
Statistical Analysis All statistical analyses in this study were performed using Analyse-it for Microsoft Excel version 5.30.5.
Receiver operating characteristic (ROC) curve analysis and all statistical analyses were performed using Analyse-it version 6.15 (Analyse-it Software Ltd., Leeds, UK).
…All statistical analyses were performed with Python 3.11.5 (Python Software Foundation, Wilmington, DE, USA), Analyse-it for Microsoft Excel 5.92, build 8053.22425, and R version 4.3.2 (R Foundation for Statistical Computing, Vienna,…
The statistical analysis was performed by Excel Analyse-it ® v.
The analyses were performed with SPSS software v23.0 (IBM Corp., Armonk, NY), Statistica™ software (StatSoft, Tulsa, OK, USA) and Excel Analyse-it software ™ (Microsoft Redmond, WA, USA) when appropriate.
Statistical analysis was run on Analyse-it for Excel (Microsoft Corporation, Redmond, WA, United States).
2.4 Statistical analysis Statistical analysis was run on Analyse-It software (Analyse-It, Leeds, UK).
Comparisons between countries or speciality groups were undertaken using the Chi‐square test (2 × 2 or omnibus as appropriate) using Analyse‐it for Microsoft Excel (version 2.30).
The statistical analysis was performed using Excel Analyse-it ® v.
Statistical analyses were performed using Analyse-it (version 6.15.4, Analyse-it Software, Ltd., Leeds, UK) and Python (version 3.12.12, Python Software Foundation, Wilmington, DE, USA).
…Biomed) Ceveron s100 (Technoclone) Technochrom anti-Xa (Technoclone) Statistical analysis was performed using Analyse-it for Microsoft Excel 6.10.1 (Analyse-it ® for Microsoft ® Excel 6.10.1, Leeds, UK).
Statistical analysis was performed using Microsoft Excel V.2021 and Analyse-IT software.
Statistical analyses were conducted using Analyse‐it Software, Leeds, U.K.
Analyse‐it v2.30 for Microsoft Excel (Analyse‐it Software, Ltd) was utilized for all statistical computations.
Statistical analyses were performed using the Analyse-it software package (trial copy, Version 6.16.2, Ltd., Leeds, UK) and MS Excel to evaluate the temporal change in the total concentration of dissolved ions for Group 1 and Group 2.
Statistics Statistical analyses were conducted using SPSS version 22.0, a trial version of MedCalc software, and Analyse-it version 2.07 (Analyse-it Software Ltd.).
Statistical analysis was performed using RStudio 2023.09 and Analyse‐it for Microsoft Excel 6.15.4.
Statistical analyses All statistical analyses were conducted using Analyse-it 5.30.4 (Analyse-it Software, Ltd., Leeds, UK).
Statistical Analysis Statistical analysis was performed using Analyse-it software (Analyse-it Software, 6.15.4, Ltd., Leeds, UK).
Statistical Analyses All statistical analyses were conducted using SPSS version 18.0 (IBM, Inc.) and Analyse-it (Analyse-it Software, Ltd).
Statistical analyses and graphs were performed using Analyse-it Version 6.15 (Analyse-it Software Ltd., Leeds, UK) integrated with Microsoft Excel and IBM SPSS Statistics, version 31 (IBM Corp., Armonk, NY, USA).
Statistical Analysis Statistical analyses were performed using IBM SPSS Statistics v23.0 (IBM Corp., Armonk, NY, USA), Analyse-it (Microsoft Excel add-in), MedCalc v23.3.7 (64-bit), and MetaboAnalyst ( www.metaboanalyst.ca ).
Statistical analysis methods Statistical analyses were performed using Statistical Program for the Social Sciences (SPSS) version 18.0 (IBM Inc.) and Analyse-it (Analyse-it Software Ltd).
The effects of symptom duration for RAT positivity or negativity in the RT-PCR positive samples were calculated with Student’s t test using Analyse-IT Software (Microsoft, Redmond, WA, USA).
Box-and-whisker plots were generated using Analyse-It for Microsoft Excel and show median, first, and third quartiles, observations within 1.5 times the interquartile range, and all individual data points.
canadensis EOs was performed using Microsoft Excel Add-in Analyse-it 5.30 Standard Edition (Analyse-it Software, Ltd., Leeds, UK) ( Supplementary Material, Figures S1 and S2 ).
…Prism version 9.0 (GraphPad Software, San Diego, CA, USA) and Microsoft Excel with the Analyze-it ® add-in (Analyse-it Software, Ltd., Leeds, UK) for advanced statistical procedures.
Statistical analyses were performed using Graphpad Prism version 9 (GraphPad Software, La Jolla, CA, USA) and Analyze-it for Microsoft Excel 5.40 (Analyse-it Software Ltd, Leeds, UK).
Analyses were performed with IBM SPSS Statistics 26 and Analyse-it (Excel).
Coefficients of variation percentages (CV%) were calculated based on CLSI-EP05A suggested analysis of variance using the Analyse-it software, allowing evaluation of repeatability, within-lot precision, and within-laboratory precision.
Statistical analysis Statistical analysis was carried out using Analyse-it™ software, version 5.92 (Analyse-it Software Ltd, Leeds, UK).
Statistics The data obtained from the study were analyzed using the Analyse-it Software (Analyse-it Software, Ltd., Leeds, United Kingdom) and the Statistical Package for the Social Sciences (SPSS) 23 package program.
Statistical analyses Statistical analyses were performed using Analyze-it Software (Analyse-it Software, Ltd., Leeds, United Kingdom) and SPSS 23.0 package programs.
Statistical analyses All non-parametric statistical analyses were performed using Analyse-it for Excel (Analyse-it Software, Leeds, UK) and data displayed as median, mean, minimum and maximum, with…
…made against a control) or Bonferroni’s test (when comparison was made between each pair of groups) by means of Analyse-it for Microsoft Excel, version 2.16 (Analyse-it Software, Ltd., Leeds, UK).
Results obtained 6,12 and 24 months postoperatively were compared with the pre-operative values using “Analyse-it software v5.40.2” and Graphpad Prism v9.3 for figures and tables.
…size Statistical analyses We used IBM ® SPSS ® Statistics 22.0 (IBM Corp., Armonk, United States of America) and Analyse-it statistical software (Analyse-it Software, Ltd., Leeds, United Kingdom) for data analysis.
CV% were determined based on CLSI-EP05A guidelines, using an “Analysis of variance” with the Analyse-it software, to assess within-lot and within-laboratory precision.
…Microsoft Excel software (Microsoft Office 2019, Microsoft Corp., USA), while for in-detail statistical analysis Analyse-it (Analyse-it Software, Ltd., Leeds, UK) add-in was used, which provided possibilities for needed inferential…
Statistical Analysis Statistical analyses were performed using Microsoft Excel and dedicated statistical software Analyse-it v.5.66 (Analyse-it Software Ltd., Leeds, UK).
All statistical analyses were performed using GraphPad Prism version 9 (GraphPad Software, La Jolla, CA, USA), R statistical package v.4.0.5, and Analyse-it for Microsoft Excel 5.40 (Analyse-it Software Ltd., Leeds, UK).
Todos los análisis estadísticos se realizaron con el programa Analyse-it (Analyse-it Software Ltd, Leeds, Reino Unido).
The statistical analysis was performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis was performed using the R language and environment for statistical computing version 4.2.2 (R Foundation for Statistical Computing) and Analyse‐it version 6.15 for Microsoft Excel.
Estimates, 95% confidence intervals (95% CI) and figures were produced using Analyse‐it version 6.15 for Microsoft Excel, Stata MP v.18, and the R language and environment for statistical computing…
The statistical analysis was performed with Analyse-it on Microsoft Excel version 2108 (Build 14326.20404).
The statistical analyses were performed using Analyse-it software for Microsoft Excel (Leeds, UK, version 4.97), and the significance level was set at p < 0.05.
Statistical analysis was performed using specific software (Analyse-it v.
Descriptive statistics were performed for each dataset using a statistical software package (Analyse-It, Leeds, UK).
Statistical Analysis Data analysis was performed using Analyse-it ® version 4.00, Method evaluation edition, (Leeds, UK), a third-party Microsoft Excel (version 2108) extension,…
…2306 Build 16.0.16529.20100, Microsoft Corp., Redmond, WA, USA) and statistical analysis was performed using the Analyse-it ® 6.01.1 add-in (Analyse-it Software Ltd., Leeds, UK).
Statistical analysis Microsoft Excel 2013 (Seattle, WA, USA), Analyse-it for Microsoft Excel Method Evaluation Edition version 5.40.2 (Analyse-it Software, Ltd., Leeds, UK), and SPSS…
Statistical analyses were performed using Analyze-it Method Evaluation Edition software version 2.26 (Analyse-it Software Ltd., Leeds, UK) and MedCalc software version 19.8 (MedCalc Software Ltd., Ostend, Belgium).
To diagnose platelet clumps using the MC-80 analyzer, we used cutoffs of ≥5 platelet clumps in standard mode and ≥15 in PLT-Pro mode, using Analyse-it version 5.90 (Analyse-it Software, Leeds, UK).
Analyze-it Method Evaluation Edition software (version 2.26; Analyse-it Software Ltd., Leeds, UK) was used to determine the precision and linearity values.
On the other hand, Bland–Altman analyses can also be performed with a web-based tool called BA-plotteR and a paid statistical analysis add-in for Microsoft Excel called Analyze-it ( https://analyse-it.com/ ).
Variations of RBC parameters were assayed with Mann-Whitney paired test (Analyse-it; Analyse-it Software Ltd, Leeds, UK).
…Windows version 10.2.3 (403) (GraphPad Software, LLC, La Jolla, CA, USA), Excel 2019 (Microsoft Office 2019), and Analyse-it for Microsoft Excel 6.15.4 (Analyse-it Software, Ltd., Leeds, UK).
Statistical analysis The data was processed with MS Excel and Analyse-it® (Analyse-it Software, Leeds, United Kingdom).
The statistical analysis was performed with Analyse-it on Microsoft Excel version 2108 (Build 14326.20404) with the exception of the Fisher’s exact and the chi-square…
Analysis was performed using Analyse-It (Leeds, UK).
The data were exported and analyzed using Analyse-It for Mi- Microsoft Excel, version 5.90 (Analyse-It Software Ltd, Leeds, UK).
The statistical analysis was conducted using the Analyse-it Ultimate Edition Ver.
Statistical analyses were carried out using Analyse-it software version 5.80.2 to perform Passing–Bablok analyses to compare serum and heparinized plasma.
Statistics Precision data analysis was conducted using Analyse-it for Microsoft Excel ( info@analyse-it.com ; http://www.analyse-it.com (accessed on 18 April 2024); Microsoft,…
All the statistical analyses were performed using Analyse-it version 6.15.4 (Analyse-it Software, Ltd., Leeds, UK), an add-on program to Microsoft Excel 2019 (Microsoft…
All statistical analyses were performed using the Analyse-it version 6.15 (Analyse-it Software Ltd., Leeds, UK) add-in in Microsoft Excel 2019 (Microsoft Corp., Redmond, WA, USA).
Statistical analysis Statistical analyses were performed with MedCalc Statistical Software Version 22.009 (Oostende, Belgium), GraphPad Prism Version 9.1.2, and Analyse-It for Microsoft Excel (version 23).
Statistical analysis of the CoP parameters was performed using Analyse-it for Microsoft Excel 6.15.42024 (Microsoft Office 2021).
Statistical analysis was performed using Graph Pad Prism (version 9.0, Graph Pad, San Diego, CA, USA), Statistical Package for Social Science version 28.0 (IBM Corporation, Armonk, New York, USA), and Analyse-It (version 4.0, Leeds, UK).
All data were analyzed using Analyse-it (Analyse-it Software Ltd., Leeds, UK), Microsoft Excel 2016 (Microsoft, Redmond, WA), R studio software, and SPSS 25 (SPSS, Chicago, IL, USA).
monocytogenes strains at each temperature were statistically evaluated using the Analyse-it Method Validation package ver.
The different methods were compared using Bland-Altman and Passing-Bablok tests with Analyse-it software.
Statistical analyses were performed using Analyse-IT for Microsoft Excel (Analyse-IT Software Ltd., Leeds, UK).
All the analyses were carried out using the Analyze-it package software (Analyse-it Software, Ltd, UK).
In this study, all analyses were performed using SPSS for Windows, Version 22 (SPSS Inc., Chicago) and Analyse-it for Microsoft Excel (Analyse-it Software, Ltd.).
…standard Sigma-Aldrich Cat# 21639 Software and algorithms R, version 4.1.3 R software http://www.r-project.org Analyse-it, version 6.15 Analyse-it Software, Ltd., Leeds, UK https://analyse-it.com BioRender BioRender…
2.7 Statistical Analysis Statistical analysis was performed by Analyse‐it for Microsoft Excel (Analyse‐it Software, Ltd., Leeds, UK).
Analyses were performed using Analyse-it 5.40 software for Microsoft Excel (Analyse-it Software, Ltd., Leeds, UK) and JMP 16.2.0 software (SAS Institute, Cary, NC, USA).
Statistical analyses (i.e., Passing–Bablok and Bland–Altman analyses) were performed using Analyse-it (Analyse-it Software Ltd., Leeds, UK, Version 5.10.9).
Statistical analyses were performed using the Analyse-it™ Standard Edition (Analyse-it 4.80 Software, Ltd., Leeds, UK) package.
SPSS IBM Statistics 26 (IBM SPSS, Chicago, USA) and Analyse-it (Analyse-it Software Ltd., Leeds, UK) were used for statistical analyses.
The statistical analysis was performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis (Analyse-it for Microsoft Excel; Analyse-it Software Ltd, Leeds, UK) was based on Wilcoxon matched-pairs test, while the…
Statistical analysis was performed using the Analyse-it™ Standard Edition package (Analyse-it 4.80 Software, Ltd., Leeds, UK).
Data Analysis Statistical analysis of the CoP parameters was performed using Analyse-it for Microsoft Excel 6.15.4 2024 (Microsoft Office 2021).
Statistical analyses were performed using Analyse-it software for Microsoft Excel, Ultimate Edition, v.6.15.4 (Analyse-it Software Ltd., Leeds, UK).
Statistical analysis was performed using Analyse-it version 6 (Analyse-it Software, Ltd., Leeds, UK) and IBM SPSS version 25 (IBM, New York, NY, USA).
Statistical Analysis Statistical analysis was performed using Analyse-it software for Microsoft Excel (Analyse-it Software Ltd., Leeds, UK).
Data for precision was analyzed using the Analyse-it plug-in on Excel, following guidelines in EP05-A2 by the Clinical Laboratory Standards Institute(CLSI) [ 15 ].
The PCA analysis for the proteome was done with Analyse-it for Microsoft Excel (version 2.30) ( S1 Fig ).
All statistical analyses were performed using StatSoft Statistica v10.0 and Analyse-it for Microsoft Excel v3.53 software.
Analyses were performed using GraphPad Prism 9 (GraphPad Software, San Diego, California, USA) and Microsoft Excel Analyse-it software (Microsoft Corp, Redmond, Washington).
Data were analyzed using a one factor (days) ANOVA model with Analyse-it software (Analyse-it Software, Ltd., Leeds, United Kingdom) for Microsoft Excel.
Statistical analysis Statistical analyses were performed using Analyse-it (Analyse-it Software, Ltd., Leeds, UK) with Excel (Microsoft Corp., Redmond, WA, USA).
Statistical analyses were performed using Analyse-it for Microsoft Excel version 2.30 (Analyse-it Software, Ltd.
These results were used to calculate the LoD95 to improve the analytical sensitivity, which was determined to be 57.00 copies per reaction using Probit regression analysis using Analyse-it software.
Statistical analysis All statistical analyses were performed using Analyse-it v5.10 (Analyse-it Software, Leeds, UK) and Microsoft Excel 2019 (Microsoft, Redmond, WA, USA).
Statistical analysis Passing–Bablok regression fit analysis was performed using Analyse-it (ver.
Analyses were made in IBM SPSS Statistics v27 (IBM Corp), R v4.2.2 (R Core Team), and Microsoft Excel 365 v2212 (Microsoft Corporation) with Analyse-it for Microsoft Excel 6.15 (Analyse-it Software Ltd, http://analyse-it.com/ ).
The statistical analyses were performed using IBM® SPSS® version 22 (IBM India Pvt Ltd, India), MedCal® (MedCalc Software Ltd, Belgium), SciPy 1.1.0 (Austin, TX, USA), Analyse-it® version 6.15 (Analyse-it Software Ltd.
Statistical Analyses Statistical analysis was run with the Analyse-it software v.
To analyze the association of protein expression and patient age, logistic regression models and likelihood ratio tests were calculated using Analyse-it (Excel 365 Add-in for Microsoft Excel 5.40).
Statistical analysis Calculation of proportions and corresponding Wilson 95% confidence intervals were performed using Analyse-IT v4.81 (Leeds, United Kingdom).
RI was calculated using Analyse-it on Microsoft Excel version 2018 (Build 14326.20404).
…12 ) was analyzed with univariate (Pearson’s test) and multivariate (multiple linear regression analysis), using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
The Google Trends scores were then compared using Student’s T-test and Pearson’s correlation, using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
The statistical analysis was conducted with Analyse-it (Analyse-it Software Ltd, Leeds, UK), with univariate (Spearman’s correlation, Mann–Whitney U test) and multivariate (multiple linear regression) analysis.
Las diferencias se analizaron mediante la prueba U de Mann-Whitney (Analyse-it Software Ltd, Leeds, Reino Unido).
Results of measurements at the three time points were reported as median and interquartile range and compared using paired Mann-Whitney U test (Analyse-it Software Ltd, Leeds, UK).
The statistical analysis was conducted using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
El análisis estadístico se realizó con el programa Analyse-it (Analyse-it Software Ltd, Leeds, Reino Unido).
Statistical analysis Statistical analysis was performed using MedCalc version 20.106 (MedCalc Software, Ostend, Belgium) and Analyse-it for Microsoft Excel 5.92 (Analyse-it Software, Leeds, UK).
All data were analyzed using Analyse-it software (Leeds, UK), Microsoft Excel 2016 (Microsoft, Redmond, WA, USA), and SPSS 25 (SPSS Inc., Chicago, IL, USA).
Statistical analyses were performed using Analyse-it v5.68 (Analyse-it Software Ltd., Leeds, UK).
Statistical analysis was performed using Microsoft Excel 2013 with the add-in program Analyse-it v5.01 (Microsoft Corporation, Redmond, WA, USA) and MedCalc software ( https://www.medcalc.org/ ).
Statistical analysis Microsoft Excel 2013 (Seattle, WA, USA), Analyse-it for Microsoft Excel method evaluation edition version 5.40.2 (Analyse-it Software, Ltd., Leeds, UK), Statistical…
Statistical analysis All the relevant data were tabulated into Microsoft Excel and analyzed with “Analyse-it for excel version 4.3.” Quantitative variables were summarized as mean and standard deviation (SD) or median and…
Statistical analysis was performed with GraphPad Prism (version 9.2.0, Graphpad Software, San Diego, USA), Analyse-it Method validation edition (version 5.65.3, Analyse-it Software, Leeds, UK), and Excel with the Analysis Toolpak…
The statystical analysis was performed using the statistical software Analyse-it for Microsoft Excel (version 5.9) (Microsoft, Leeds, United Kindom).
Receiver operating curve (ROC) analysis and the reported values of sensitivity, specificity, and positive and negative predictive values were performed using Analyse-it Software, Ltd.
All statistical analysis was performed using Analyse-It method validation edition (Analyse-It, Leeds, United Kingdom).
Statistical Analyses Analyse-it version 5.40.2 (Analyse-it Software) was used to generate all scatter plots, ROC curves, and to calculate the area under the ROC curves (AUC).
Statistical analyses were performed using Analyse-it v4.50 (Analyse-it Software Ltd, Leeds, UK) and Prism 9.0.1 (GraphPad Software, San Diego, CA, USA).
Descriptive statistical analyses were conducted using the Analyse-it™ software (version 3.0) package (Analyse-it Software Ltd., Leeds, UK).
Data were compiled and statistical analyses were performed using Microsoft Excel 2016 (Redmond, WA), the statistical add-in software Analyse-it version 4.97.4 (Leeds, UK), and R version 4.0.2.
All statistics were done using Analyse-it software (Leeds, UK).
Statistical analyses were conducted using Microsoft Excel (2016) with the Analyse-it add-in for Microsoft Excel (version 2.30).
All statistical analyses were performed using Analyse-it for Microsoft Excel 5.40 (Analyse-it Software Ltd., Leeds, UK) and SPSS version 26.0 (IBM Corp., Armonk, NY, USA).
The limit of quantification and linearity analysis were performed using Analyse-it for Microsoft Excel (version 2.30) (Analyse-it Software, Ltd., Leeds, UK).
Statistical analyses were performed using SPSS (version 25.0; IBM Corp., Armonk, NY, USA) and Microsoft Excel 2019 (Microsoft Corp., Redmond, WA, USA) with Analyse-it version 5.92 (Analyse-it Software, Ltd., Leeds, UK).
Statistical Analysis Initial data analysis was done by the Analyse-It for Microsoft Excel software (Version 5.30.1) to check for normality and identify outliers using the Tukey’s method.
The complete responses were downloaded onto an Excel spreadsheet and graphically analyzed with Analyse-it for Microsoft Excel (Analyse-it Software Ltd, Leeds, UK).
The median number (and interquartile range; IQR) of weekly Google searches for “tinnitus” was then compared with Mann–Whitney test (Analyse-it Software Ltd, Leeds, UK).
A χ2 test was performed by Analyse-it for Microsoft Excel.
Statistical analysis was performed using Analyse-it version 6.15.4 for Microsoft Excel (Analyse-it Software Ltd., Leeds, UK), and the level of significance was defined as P < 0.05.
3 The relative volumes of Google searches for both terms over time was then analyzed with Spearman’s correlation and compared between the COVID-19 and pre-COVID-19 periods with Mann-Whitney test (Analyse-it Software Ltd, Leeds, UK).
…patients [ 4 ] (online resource 1) were used to depict ROC curves by three statistical software; Analyze-it ® (Analyse-it Software Ltd, Leeds, UK), Medcalc ® (MedCalc Software Ltd, Ostend, Belgium), and IBM SPSS Statistics ® .
Spearman rank test was performed using Analyse-it for Microsoft Excel version 1.65 (Analyse-it Software Ltd., Leeds, England, UK).
…made against a control) or Bonferroni’s test (when comparison was made between each pair of groups) by means of Analyse-it for Microsoft Excel, version 2.16 (Analyse-it Software, Ltd., Leeds, UK).
Data analysis was performed using SIMCA Software, version 15.0.2 (Umetrics, Umea, Sweden), Microsoft Excel with the Analyse-it add-in, version 4.81.6, and IBM SPSS Statistics for Windows, version 28 (IBM Corporation, Armonk, NY, USA).
Data Analysis All statistical analyses were performed utilizing the Analyse-It extension for Microsoft Excel.
Statistical analyses were performed with Analyse-it version 5.92 for Microsoft Excel 2021 (Analyse-it Software Ltd., Leeds, UK).
…Teeth” in both countries were compared between pre-COVID-19 and COVID-19 periods using Mann–Whitney test (Analyse-it Software Ltd, Leeds, UK).
Passing-Bablock regression analysis was performed using Analyse-it (Leeds, UK).
Data analysis was done using Microsoft Excel® with the Analyse-it® add-in or the R statistical environment in R Studio®.
…possible with sharp dissection and some damage to underlying organ >1 h Statistical analysis was done using Analyse-it software (Leeds, UK) for mean, median, and confidence intervals (CIs) of all parametric data, and the results…
Statistical analysis was performed using R version 4.0.4 (R Foundation for Statistical Computing, Vienna, Austria) and Analyse-it for Microsoft Excel 5.92 (Analyse-it Software Ltd., Leeds, UK).
All statistical analyses were performed using Analyze-it software (Analyse-it Software, Ltd., Leeds, United Kingdom) and the IBM-SPPS 23 package statistical program (IBM Corp., Armonk, NY, USA).
Statistics Statistical analysis was performed (Excel v.2202, Microsoft; Analyse-it v.5.92, an add-in for Excel; R v.4.0.3, https://www.r-project.org/ ).
Further Statistical Analyses Further statistical analyses were conducted in Analyse-it for Excel, Version 4.51.
Furthermore, sample means and standard deviations (SD) were calculated precisely using Microsoft Excel (version 2.12; Analyse-it Ltd., Leeds, UK).
Statistics were calculated using commercially available software [Analyse-it for Microsoft Excel (version 2.30), Leeds, UK].
Analyse-it software (5.66.0 for MS Excel 10) was used for the statistical analysis and GraphPad version 9 (October 2020) for graph design.
Analysis was performed using Microsoft Excel 365 with Real Statistics Resource Pack software (Release 6.8) and Analyse‐it software (Version 6.01).
…the overlapping of male and female stages in two cultivars All analyses were done in SAS studio version 3.8 and Analyse-it Standard Version 2.30 and Minitab version 17 (State College, PA: Minitab, Inc).
…size Statistical analyses We used IBM ® SPSS ® Statistics 22.0 (IBM Corp., Armonk, United States of America) and Analyse-it statistical software (Analyse-it Software, Ltd., Leeds, United Kingdom) for data analysis.
2.7.12 Statistical analysis Statistical analyses were performed using Analyse-it version 4.80.8 (Analyse-it Software Ltd, Leeds, United Kingdom).
Statistical analysis was performed using Analyse-it (v2.30 Excel 12+ Analyse-it Software Ltd, Leeds, UK) for Microsoft® Excel (Washington, USA).
…as median and interquartile range (IQR), and differences between periods were analyzed using Mann-Whitney test (analyse-it Software Ltd, Leeds, UK).
The limit of detection (LoD) was determined by Analyse-it software, utilizing 55 independent measurements of plasma samples depleted from PAM (limit of blank, LoB), and 32…
Statistical analysis Passing–Bablok regression analysis, performed in Analyse-it (Microsoft Excel), was used to compare the results of the dRAPPID (mean) with the ELISA.
Analytical statistics were performed using Microsoft Excel 365 with Real Statistics Resource Pack software (Release 7.6, copyright 2013–2021, Charles Zaiontz, www.real-statistics.com ) and Analyse-it software (Leeds, UK, Version 6.01).
The weekly Google Trends score data were reported as median and interquartile range (IQR), whilst their differences in the two separate countries (US and UK) were compared using Mann–Whitney test (Analyse-it Software Ltd, Leeds, UK).
4 Test results, expressed as median and interquartile range (IQR), were analyzed with Mann-Whitney U test and multivariate analysis (multiple linear regression analysis), using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
The statistical analysis was performed using Analyse-it (Analyse-it Software Ltd., Leeds, UK).
14.8.1, Ostend, Belgium) and Analyse‐it software packages for Windows (Ver.
Sequence and Statistical Analysis The Analyse-it method evaluation edition software version 2.26 (Analyse-it Software Ltd., Leeds, UK) was used for descriptive statistics.
A correlation test (Spearman) and receiver operating characteristic curve (ROC) were conducted using Analyse-it software v5.65.
…with Mann–Whitney U and Chi-square (with Yates’ correction) tests, and with Spearman’s correlation, using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analyses Statistical analyses were conducted using StatFlex version 7.0 software (Artech Co., Ltd., Osaka, Japan) and Analyse-it version 5.90 software (Analyse-it Software, Ltd.; https://analyse-it.com/ ).
Data analysis Data were analyzed using the Excel statistical package Analyse-it 5.68 (Leeds, UK).
Data analysis Data were analyzed using Analyse-It and Windows Excel® statistical method packages.
All statistical analyses were carried out using the commercial software Analyse-it, version 5.68 (Analyse-it Software Ltd., Leeds, West Yorkshire, UK).
Statistical Analysis Statistical analysis was performed using the Analyse-it software for Microsoft Excel (Analyse-it Software Ltd., Leeds, UK).
Statistical analysis Statistical analyses were performed using PASW version 18.0 (SPSS Inc., Chicago, IL, USA), Analyse-it Method Evaluation Edition software (version 2.26; Analyse-it Software Ltd., Leeds, UK), and R statistical…
Statistical analysis All statistical analyses were performed using the Analyse-it software, version 4.65 (Analyse-it Software, Leeds, UK).
14 ROC curves were generated with Analyse-it for Microsoft Excel.
Statistical analysis Microsoft Excel (Microsoft Corp., Redmond, WA, USA) and Analyse-it v5.11 ( https://analyse-it.com/ ) statistical software were used.
…and standard guidelines of the CLSI H26-A2 and ICSH 2014, and statistical analyses were performed with the Analyse-it ( https://analyse-it.com/ ) and Microsoft Excel 2019 software (Microsoft Corp., Redmond, WA, USA).
Statistical analysis Statistical analysis was performed using Analyse-it v4.92 statistical software (Analyse-it, Leeds, UK) and the results are presented as percentiles.
14 Statistical analyses were conducted using Analyse-it for Microsoft Excel V.4.90.4 from Analyse-it Software (Leeds, UK).
The analysis was performed using SPSS version 20.0 (IBM Corp., Armonk, NY, USA) and Analyse-it version 5.01 (Analyse-it Software, Ltd., Leeds, UK) added-in Microsoft Excel (Microsoft Corporation, Redmond, WA, USA).
…using expression level for each miRNA in the PBMC specimens from patients with CAD and control individuals by Analyse-it software (Analyse-it Software, Leeds, UK).
in an Excel Worksheet (Microsoft Excel; Microsoft, Redmond, WA, US), which were then used to perform univariate and multivariate correlation analyses, using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical Analysis All statistical analysis was performed by Excel Analyse-it ® v.
Passing–Bablok regression was calculated with the Analyse-it Method Validation Edition for Microsoft Excel 5.90 (Analyse-it Software Ltd., Leeds, UK) 2.7.
Statistical analysis was performed using GraphPad Prism 8 and Analyse-it for Microsoft Excel.
…25.0, IBM Corp., Armonk, NY, USA) and Microsoft Excel 2019 (Microsoft Corp., Redmond, Washington, USA) with Analyse-it version 5.81 (Analyse-it Software, Ltd., Leeds, UK).
Statistical analyses Statistical analyses were performed using Statistical Program for the Social Sciences version 18.0 (IBM, Inc.) and Analyse-it (Analyse-it Software, Ltd).
Statistics The analysis was carried out on MS Excel using the Analyse-it add-in.
All statistical analyses were performed using R V.4.1.2 software for Windows (R Development Core Team) and Analyse-it (Analyse-it Software, Leeds, UK).
Statistical analysis was undertaken using Analyse-It add-in for Excel.
Statistical Analysis Statistical parameters were calculated using Analyse-it software version 5.51 (Analyse-it, Leeds, UK).
Statistical analysis was performed using Stata © 13.1 (StataCorp LP, College Station, USA) or Microsoft Excel 2019 with the statistical add-in tool pack Analyse-It® (Version 4.65.3, Analyse-it Software Ltd, Leeds, England).
All data analyses were performed in MEDCALC® Statistical Software version 19.4 (MedCalc Software Ltd, Ostend, Belgium) and Analyse-it Software version 5.65.3 (Leeds, UK) with a p < 0.05 considered statistically significant.
13.0 (SPSS Inc., Chicago, IL, USA) and Analyse-it ver.
Statistical tests were performed using Analyse-it for Microsoft Excel 5.40 (Analyse-it Software Ltd).
Data analyses were conducted using Analyse-it Version 4.95.4 (Analyse-it Software, Leeds, UK).
ROC curves were constructed using Analyse-it for Excel (Microsoft, Redmond, WA).
Statistical analysis and figures were computed on Analyse-it Software V5.65.
The data were evaluated using version 5.01 of Analyse-it (Analyse-it Software, Ltd., Leeds, UK).
Analyse-it for Microsoft Excel (version 5.90, Leeds, UK) and GraphPad Prism (version 5.03, San Diego, CA, USA) were used for statistical analysis and graphical presentation.
Statistical Analyses Statistical analyses and receiver operating characteristic (ROC) curves were performed using Analyse-it ® for Microsoft Excel v5.30.4.
Statistical Analysis Statistical analysis was performed in IBM SPSS Statistics software, version 27.0 (IBM Corp., Armonk, NY, USA) and Analyse-it statistical software, version 5.10 (Analyse-it Software, Ltd., Leeds, UK).
Statistical Analysis Analyse-it Method Evaluation Edition software, version 2.26 (Analyse-it Software Ltd., Leeds, UK) was used to evaluate descriptive statistics.
The following statistical analysis was carried out with Analyse-it software (Analyse-it Software Ltd, Leeds, UK).
Results of testing were finally reported as median and interquartile range (IQR), and the statistical analysis was performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Precision of automated methods was calculated using one-way ANOVA in Microsoft Excel 2016 version Analyse-it Software Method Validation edition (Ltd.
Data analyses were conducted using the Analyse-it version 4.95.4 (Analyse-it Software, Leeds, UK).
…by receiver operating characteristic (ROC) analyses and expressed as the area under the curve (AUC) Excel Analyse‐it software TM (Microsoft Redmond,).
The statistical analysis was carried out using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
IBM SPSS Statistics for Windows, version 23.0 (IBM Corp) and Analyse-it (Analyse-it Software, Ltd., Leeds, UK) were used to analyze the data.
Statistical analysis Statistical analysis was performed using Analyse-it Add-on for Microsoft Excel (Analyse-it Software, Ltd.).
MedCalc software version 19.8 (MedCalc Software Ltd., Ostend, Belgium) and Analyse-it Method Evaluation Edition software version 2.26 (Analyse-it Software Ltd., Leeds, UK) were used for the analyses.
Statistical analysis was performed with Analyse-it version 5.92 for Microsoft Excel (Analyse-it Software Ltd., Leeds, UK).
…negative percent agreement (PPA and NPA, respectively) with Wilson score 95% confidence intervals (CI) using the Analyse-it software add-in for Microsoft Excel.
2.6 Statistical analysis GraphPad Prism Software (version 8.3.0, CA, United States), Medcalc software (Ostend, Belgium), and Analyse-it Software (version 5.66, Leeds, United Kingdom) were used to statistically analyze all data.
Statistical analysis was conducted using the Analyse-it statistical package (Leeds, United Kingdom, version 4.92).
The alpha diversity differences among groups were assessed using a Kruskal–Wallis (followed, when significant results were obtained, by a post-hoc test) performed with Analyse-it Software for Microsoft excel.
…clinicopathological data from affected dogs to the data from healthy related and unrelated (control) ESSP dogs (Analyse-it ® for Microsoft Excel Office 365 software, Leeds, UK).
Statistical analysis was performed using Graph Pad Prism (version 9.0, Graph Pad, San Diego, CA, USA), Statistical Package for Social Science version 26.0 (IBM Corporation, Armonk, New York, USA), and Analyse-It (version 4.0, Leeds, UK).
…and were analyzed using Spearman’s correlation (with 95% confidence interval; 95%CI) and Mann–Whitney test, using Analyse-it (Analyse-it Software Ltd., Leeds, UK).
…values, expressed as kilo Binding Antibodies Units per litre (kBAU/L), was assessed with Mann-Whitney test, using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
All statistical analyses were performed using Analyse-it (version 5.90, Analyse-it Software, Ltd., http://analyse-it.com/ ; 2021).
…accuracy of each in silico tool, a receiver operating characteristic (ROC) analysis was performed using the Analyse-it Method Validation Edition software, v5.68 (Analyse-it Software Ltd, City West Business Park, Leeds, UK).
2.6 Statistical analysis Statistical analyses were performed with Excel® 2010 (Microsoft), MedCalc® 12.7.8.0 (MedCalc Software, Belgium) and Method Validation version 5.10.9 (Analyse‐it Software, United Kingdom).
3.2 BDI‐II Statistical analyses were performed using GraphPad InStat (version 3.10, 2009, CA, USA) and Analyse‐It for Microsoft Excel (version 2.20 Analyse‐it Software, Ltd., Leeds, UK).
…period, was downloaded into a Microsoft Excel file (Microsoft, Redmond, WA, United States) and analyzed with Analyse-it (Analyse-it Software Ltd., Leeds, UK).
Statistical analysis was carried out using Student t -test, Pearson’s Chi-squared, ANOVA and Logistic Regression from the Analyse-it package for Microsoft Excel and STATA/IC.
Statistical analysis For statistical analysis, Microsoft Excel 2013 (Microsoft), Analyse‐it for Microsoft Excel Method Evaluation Edition version 5.40.2 (Analyse‐it Software, Ltd.), IBM SPSS Statistics…
The 99th percentile URLs were established in MedCalc 20.008 (MedCalc Software) and Analyse‐it v.5.81 (Analyse‐it Software, Ltd.).
Statistical analyses Analyse‐it 4.20.01 (Analyse‐it Software, Ltd.
Statistical analysis All statistical analyses were carried out using Analyse‐it version 5.80.02 (Analse‐it Software, Ltd).
Probit analysis was used to estimate lower limit of detection (analytical sensitivity) for both amplification methods and was performed with Analyse-it software (Analyse-it Software, Ltd.) [37] .
All statistical analyses were performed using Analysit (Analyse-it Software Ltd., Leeds, UK) plug-in for Excel(Microsoft, Redmond, Washington, USA).
Statistical Analysis Descriptive and comparative statistics were established using Microsoft Excel (MSO Professional Plus 2016) and the statistical add-in software tool Analyse-it v6.01.1 for Excel (Leeds, UK).
Statistical analyses were performed using Analyse-it software (Analyse-it, Ltd.) and SAS for Windows (version 9.4; SAS institute, Cary, NC).
Statistical analysis was completed using Analyse-it (Leeds, United Kingdom, version 4.92).
Analysis was performed on Analyze-it (Analyse-it Software, Leeds, UK).
Microsoft® Office Excel and a statistical software package Analyse-It® (version 3.90.7) were used for validation and statistical calculations.
Statistical analysis Statistical analysis was performed using the Analyse-it® software version 5.01 (Leeds, United Kingdom).
The statistical analysis was carried out with Analyse-it software (Analyse-it Software Ltd, Leeds, UK).
Test results were reported as median and interquartile range (IQR), and the statistical analysis was performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
In addition, Analyse‐it software in Microsoft Excel 2020 was used to perform Principal Component Analysis (PCA)‐Biplot to see any correlation between patient comorbidities and treatments with COVID‐19 patient groups.
Statistical analysis was undertaken using Analyse‐It statistical add‐in for Microsoft Excel using Wilcoxon−Mann−Whitney testing as appropriate.
Multivariable analysis was performed using Analyse-IT software.
Statistical analysis Data analysis was performed by using Analyse-it for Microsoft Excel version 2.30 and Microsoft Excel 2016.
Results were compared with Spearman’s correlation and Bland and Altman plots, using Analyse-it (Analyse-it Software Ltd., Leeds, UK).
Statistical analysis was performed using the statistics software Analyse-it (Leeds, UK) v 5.40.2 or R (v 3.6.0).
Results obtained 6,12 and 24 months postoperatively were compared with the pre-operative values using “Analyse-it software v5.40.2”.
…estimates with pill counting and self-report were graphically displayed through Bland-Altman plots 28 using Analyse-it software (version 5.50, Leeds, UK) in Microsoft Excel (2016).
A principal component analysis (PCA) was performed using Analyse-it Software (v.
Receiver operating characteristic (ROC) curves were plotted and analyzed using Analyse-it Version 4.60 for Microsoft Excel (Leeds, UK) to compare the area under the curve (AUC) by both methods.
Statistical analyses were performed using Analyse-it® for Microsoft Excel v5.30.4 (Analyse-it Software, Leeds, United Kingdom).
Statistical analysis Analyses were conducted in Microsoft Excel using the Analyse-it plugin (Analyse-it Software, Ltd., Leeds, United Kingdom).
The statistical analysis was carried out with Analyse-it software (Analyse-it Software Ltd, Leeds, UK).
Data analysis Data analysis was performed using Microsoft® Excel® (Microsoft Corporation, Redmond WA), Analyse-it® Method Validation Edition (version 5.66, Analyse-it Software, Ltd., Leeds, United Kingdom) and Prism (Prism 9,…
Statistical analysis Analyse-it for Microsoft Excel Method Validation edition (version 5.66), an add-in statistical analysis software for MS…
15 Statistical Analysis Statistical analysis was performed using Analyse-it for Excel 5.90 (2021) (Analyse-it Software, Ltd, Leeds, UK).
Statistics were performed using MEDCALC (V.17.1, Ostend, Belgium) and Analyse-it for Microsoft Excel (V.4.90).
Statistical analysis Statistical analysis was performed using Analyse-it version 5.66 (Analyse-it Software, Ltd., Leeds, UK).
Statistical analysis and susceptibility reporting Data were analyzed using Analyse-it Ultimate Edition (Leeds, United Kingdom).
…(Release 7.6, copyright 2013–2021, Charles Zaiontz, www.real-statistics.com , accessed on 13 August 2022) and Analyse-it software (Leeds, UK, Version 6.01).
Statistical Analysis The normality of appropriate data sets was confirmed by the Shapiro–Wilks test using the Analyse-it statistical package (Leeds, UK, version 4.92).
Analysis was performed using Microsoft Excel 365 with Real Statistics Resource Pack software (Release 6.8) and Analyse-it software (Version 5.66).
Analysis was performed using Microsoft Excel 365 with Real Statistics Resource Pack (Release 6.8) and Analyse-it software (Version 5.66).
Statistics For all statistical analysis, PRISM 6 (GraphPad Software, Inc) or Excel Analyse-It (Microsoft) was used.
Final results were reported as median and interquartile range (IQR), and compared with Mann-Whitney or Chi square tests, when appropriate, using Analyse-it software (Analyse-it Software Ltd, Leeds, UK).
…between serum CRP and anti-SARS-CoV-2 spike trimeric IgG antibodies was tested with Spearman's correlation, using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
…Other Methods We used SAS v9.4 (SAS Institute, Cary, NC, USA), R (R Foundation for Statistical Computing), and Analyse-it (Analyse-it Method Validation v6.01.1, Analyse-it, Leeds, UK) to perform statistical analyses related to method…
…numbers of inhabitants or population density was also calculated using a Spearman's correlation test run on the Analyse‐it statistical software (Analyse‐it Ltd, Leeds, UK).
Statistical analysis was carried out with Analyse-it (Analyse-it Software Ltd., Leeds, UK).
Statistical analysis was performed with the Analyze‐it software (Analyse‐it software, Leeds, UK).
17 , 30 2.4 Statistical analysis Statistical analysis was performed using Analyse‐it for Microsoft Excel Office 365 (Analyse‐it Software, Leeds, UK).
Statistical analysis was performed with the statistics add‐in software for Microsoft Excel Analyse‐it (Analyse‐it, version 5.65).
Statistical Analysis Statistical analysis was performed using the Analyse-it software for Microsoft Excel.
A passing Bablok regression model (Analyze-it v5.50, Analyse-it Software, Ltd.
Statistical Analysis Statistical analyses were performed using Analyse-it Method Evaluation Edition software, version 2.26 (Analyse-it Software Ltd., Leeds, UK) and MedCalc software, version 19.8 (MedCalc Software Ltd., Ostend, Belgium).
The statistical analysis was conducted with Analyse-it (Analyse-it Software Ltd., Leeds, UK).
Initial decision analysis (Analyse‐it software, Capterra) ( 14 ) with Youden Index showed that MAP greater than 0.8 and EC4d greater than 20 MFI at…
The statistical analysis was carried out using Analyse-it (Analyse-it Software Ltd, Leeds, UK) and the statistical significance was set at p<0.05.
We converted the data to obtain a weekly average and used Spearman’s correlation via Analyse-it (Analyse-it Software Ltd, Leeds, UK) to evaluate the relationship between the keywords and the new cases of COVID-19 in India.
Statistical analysis was performed with Analyse-it software (Analyse-it Software s., Leeds, UK).
Statistical analyses Data analysis was performed using Analyse‐it for Excel version 5.66 (Microsoft), SAS version 9.4 (SAS Institute), R version 3.6.2 (R Foundation for Statistical Computing), and JMP Pro 14.1.0 (SAS Institute).
Statistical tests were carried out and all plots were generated using Microsoft Excel (Washington, DC, USA), with the Analyse-it statistical software (Leeds, UK) and MedLabQC software (Metz, France).
All data were analyzed using Analyse-it (Analyse-it Software Ltd., Leeds, UK).
The Analyse-it ver.
For statistical analysis, MedCalc Statistical Software version 18.10.2 (MedCalc Software Bvba, Ostend, Belgium) and Analyse-it for Microsoft Excel 5.51.1 (Analyse-it Software, Leeds, UK) were used.
Statistical analysis Analyse-it software (Analyse-it Software Ltd, Leeds, UK, https://analyse-it.com/ ) and Microsoft Excel ( https://www.microsoft.com/en-us/microsoft-365/excel ) were used to evaluate the data obtained.
Statistics Statistics were performed using Analyse-it software version 5.11 (Analyse-it Software, Leeds, UK).
Statistica 13 (StatSoft, Tulsa, OK, USA), GraphPad Prism 6 (GraphPad Software, San Diego, CA, USA), and Analyse-it 4.0 (Analyse-it Software, Ltd., Leeds, UK) were used for statistical analysis.
All statistical analyses were performed with Analyse-it ® , version 4.92 (Analyse-it Software, Ltd., Leeds, UK) and SPSS 20.0 (SPSS Inc., Chicago, IL, USA).
19.2, Ostend, Belgium) and Analyse-it software (Ver.
Statistical analysis Common statistical parameters were calculated using Analyse-it software version 5.51 (Analyse-it, Leeds, United Kingdom).
Descriptive statistical analyses were conducted using the Analyse-it software package (Analyse-it, UK).
Statistical Analysis Statistical analyses were performed using Analyse-it Method Evaluation Edition, version 2.26, software (Analyse-it Software Ltd., Leeds, UK), PASW version 18.0 (SPSS…
…made against a control) or Bonferroni’s test (when comparison was made between each pair of groups) by means of Analyse-it for Microsoft Excel, version 2.16 (Analyse-it Software, Ltd., Leeds, UK).
All performance calculations of EliA S1-IgG and ACE2 receptor binding inhibition assay methods were performed using Analyse-it for Microsoft Excel (v.4.60).
Statistical analysis was performed using SPSS Statistics for Windows v.25 (IBM, Armonk, NY, USA) and Analyse-it Software, Ltd.
We used Analyse-it ® for Microsoft ® Excel 5.11 for all statistical analyses.
Statistics and reproducibility All the statistical analyses were performed with GraphPad Prism or Analyse-it software.
Data analyses was conducted using the Analyse-it version 4.95.4 (Analyse-it Software, Leeds, UK).
Statistical analysis was conducted with Analyse-it (Analyse-it Software Ltd, Leeds, UK) and MetaXL, software Version 5.3 (EpiGear International Pty Ltd., Sunrise Beach, Australia).
Statistical Analysis For statistical analysis, Microsoft Excel 2013 (Seattle, WA, USA), Analyse-it for Microsoft Excel Method Evaluation Edition version 5.40.2 (Analyse-it Software, Ltd., Leeds, UK), SPSS…
controls (n = 200) and within each IIM subtype (calculated using 264 IIM samples only) were calculated using Analyse-it software (Leeds, UK).
Analyse-it Method Evaluation Edition software, version 2.26 (Analyse-it Software Ltd., Leeds, UK) and MedCalc software, version 19.8 (MedCalc Software Ltd., Ostend, Belgium) were utilized for analysis.
…San Diego, CA, USA) Validation data were analysed using MedCalc v19 (MedCalc Software, Ostend, Belgium) and analyse-it 5.66 (analyse-it Software, Leeds, UK) and SPSS 23.0 (SPSS Inc.).
The Analyse-It software for Microsoft Excel 5.30.2 Build 7069-17990 was used for this analysis.
Statistical analysis was performed with Analyseit software (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis was performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK) and MedCalc (MedCalc Software Ltd, Ostend, Belgium).
The statistical analyses were performed using Analyse-it® software version 4.92 (Analyse-it Software, Ltd., Leeds, United Kingdom).
Statistical analysis Statistical analyses were performed with Analyse-it, version 5.1 (Analyse-it Software, Ltd., Leeds, UK), SPSS Statistics for Windows, version 24.0 (SPSS, Inc.,…
Analyse-it ® for Excel method evaluation software (version 5.40.2; Leeds, UK) was used for statistical analyses.
Statistical analyses and receiver operating characteristic (ROC) curves were performed using Analyse-it® for Microsoft Excel v3.80.
Results were evaluated using Microsoft Excel and Analyze IT software (Analyse-it Software, Leeds, United Kingdom) with weighted calibration curves and significance for biomarker correlations…
Statistical Analysis Data was analyzed with a statistical software (analyse-it™ v.5.68 by Analyse-it Software.
…determine the concordance with the recommended WHO test and the clinical sensitivity and specificity, using the Analyse-it v 30.2 software ( https://analyse-it.com/ accessed on: 4 January 2021).
Statistical analysis Method comparison between POCT and central laboratory analyzers was performed using the statistical software Analyse-it for Microsoft Excel 5.4 (Analyse-it Software, Ltd., Leeds, United Kingdom).
Statistics All data were tabulated with Microsoft Office® Excel® 2016 (32‐ & 64‐bit) software (Zaventem, Belgium) and statistics were completed using the statistical Analyse‐it® software (Version no.
Statistical analysis All statistical analyses were performed by Analyse-it® for Excel method evaluation software (version 5.01; Leeds, UK).
Statistical analysis was carried out with the Analyse-it software (Analyse-it Software Ltd, Leeds, UK).
…made against a control) or Bonferroni’s test (when comparison was made between each pair of groups) by means of Analyse-it for Microsoft Excel, version 2.16 (Analyse-it Software, Ltd., Leeds, United Kingdom).
All analyses were conducted on 64 bit excel with power pivot and Analyse‐it add in (Microsoft EXCEL).
Statistical Analyses Data were analyzed using Analyse-it for MS Excel 5.60 (Analyse-it Software Ltd., Leeds, UK).
Statistical analyzes were conducted using Analyse‐it for microsoft excel 4.90.4 from Analyse‐it Software Ltd.
Data analysis was performed by using Analyse‐it for Microsoft Excel version 2.21 and Microsoft Excel 2013.
All analyses were performed using the statistical software SPSS (build 1.0.0.1246; SPSS Inc., Chicago, IL, USA) and Excel Analyse-it for Microsoft Excel (version 2.20, 2009; Analyse-it Software Ltd, Leeds, UK).
The linear mixed model was done using Analyse-it version 4.90.1.
Statistical methods Statistical analyses were performed using Analyse‐it Software v5.65 (Analyse‐it Software Ltd,).
2.9 Statistical analysis The statistical analysis was performed using Analyse‐it Software (Analyse‐it Software, Leeds, UK) and Microsoft Excel version 2016 (Microsoft Corporation, Redmond, WA, USA).
Analyses were performed with MedCalc and Analyse-it software with ethics approval obtained.
Analysis was performed using Microsoft Excel 365 with Real Statistics Resource Pack software (Release 6.8) and Analyse-it Software (Version 5.66).
…receiver operating characteristic (ROC) curve analyses according to the DeLong non parametric test [ 19 ] using Analyse-it software for Excel (Analyse-it Software, Ltd., Leeds, UK).
Statistical analysis was performed using MedCalc software, version 19.8 (MedCalc Software Ltd., Ostend, Belgium), and Analyse-it Method Evaluation Edition software, version 2.26 (Analyse-it Software Ltd., Leeds, UK).
Statistical analysis was conducted using Analyse-it Method Evaluation Edition software version 2.26 (Analyse-it Software Ltd., Leeds, UK) and MedCalc software version 19.8 (MedCalc Software Ltd., Ostend, Belgium).
The kappa coefficient (κ) was calculated using the Microsoft Excel Analyse-it software package (version 5.20).
Analysis was performed using Microsoft Excel 365 with Real Statistics Resource Pack software (Release 6.8) and Analyse-it software (Version 5.66).
Data analysis was performed in MEDCALC® Statistical Software version 17.1 (MedCalc Software Ltd., Ostend, Belgium), except for ROC curves, which are performed in Microsoft Excel + Analyse-it® Software version 5.65.3 (Leeds, UK).
Statistics All graphs and statistical analysis were generated using Graph Pad Prism statistical software version 5.04 or Analyse-it® for Microsoft Excel.
…animal experiment was performed using GraphPad Prism version 7.02 (GraphPad Software, La Jolla, California) and Analyse‐it in Microsoft Excel (Analyse‐it Software, Ltd, Leeds, UK).
Statistics All data management and statistical analyses were performed using the Analyse-it software (Analyse-it Ltd., Leeds, UK).
The statistical analysis was performed with Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Once the linear relationship between the two variables was visually verified, Deming linear regression was applied using the Analyse-it software version 5.01 (Leeds, United Kingdom).
The statistical analysis was performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis was carried out using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
To evaluate the agreement between tests, linear regression analysis with Passing‐Bablok fit, a Shapiro–Wilk test for normality of the difference, and a Bland–Altman plot were calculated using Analyse‐it Software, Ltd.
5HIAA assays were compared by Passing Bablok correlation, Bland-Altman regression, receiver operating characteristics analysis and box plot using Analyse-it for Microsoft Excel 3.76.1.
The data were visualized using Analyse-it ® (Analyse-it, Leeds, UK).
Statistical analyses were performed using Analyse-it for Microsoft Excel 5.40.2 (Analyse-it software Ltd., Leeds, UK) and SPSS 18.0 (SPSS Inc., Chicago, IL, USA), and the significance level was set to p < 0.05.
Statistical analyses were performed using Analyse-it v5.10 (Analyse-it Software, Leeds, UK) and Microsoft Excel 2019 (Microsoft, Redmond, WA, USA).
Multidimensional Correlation Analysis Multidimensional correlation analysis was carried out using PCA implemented in the plugin Analyse-it™ for Microsoft’s Excel™ 5.30.5.
To examine the comparability of the two immunoassays, a Passing–Bablok regression was carried out using the software Analyze-it v5.50 (Analyse-it Software, Ltd.
Data presentation and statistical analysis Box-and-whisker plots were generated using Analyse-It for Microsoft Excel and show median, first, and third quartile, observations within 1.5 times the interquartile…
The software Microsoft Excel Analyse-it Standard Edition v5.50 was used to perform the statistical analyses.
The statistical analyses were performed using Analyse-it (Analyse-it Software, Ltd., Leeds, UK).
Statistical analyses Statistical analyses were performed using Excel 2010 (Microsoft), Analyse-it (Analyse-it Software, Ltd, Leeds, UK), and SPSS 23 (IBM Corporation, Chicago, IL).
The data were then subjected to a One-way analysis of variance (ANOVA) [ 239 ] using Analyse-it ® Statistical analysis add-in for Microsoft Excel, significance, Excel (version 7.2.10 68) and/or ANOVA using…
All statistical testing was undertaken using Analyse-it software.
Statistical analyses were performed using the Analyse-it software, version 2.21 (Analyse-it Software Ltd, Leeds, UK) and SPSS ver.
The analytical performances were evaluated using Analyse-it software (Analyse-it Software, UK).
Statistical analysis was performed using version 5.30.1 of Analyse-it for Microsoft Excel.
Statistical Analysis Statistical analyses were performed using the Analyse-it software (Analyse-it Software, Ltd., Leeds, UK).
All statistical analyses were performed using the Analyse-it software version 3 (method validation edition, Analyse-it Software, Leeds, UK).
Statistical analyses was carried out using Analyse-it (Analyse-it Software Ltd, Leeds, UK), with significance set at P < 0.05.
Statistical analysis Statistical analyses were performed using Statistical Program for the Social Sciences (SPSS) version 22.0 (SPSS Inc.) and Analyse-it Software Ltd.
Statistical analyses All statistical analyses were conducted with Analyse-IT Method Validation Edition, v.4.60.01 (Analyse-it Software, Ltd.) and Microsoft Office Excel 2016.
Statistical analysis All statistical analyses were performed by Analyse-it for Microsoft Excel Method Evaluation Edition version 5.65.3 (Analyse-it Software, Ltd., Leeds, UK) and IBM SPSS Statistics 25 (IBM Corp., Armonk, NY, US).
Analysis was performed using Microsoft Excel 365 with Real Statistics Resource Pack software (Release 6.8) and Analyse-it software (Version 5.66).
Statistical Analysis Statistics were performed using the Analyse-it statistical package (Leeds, UK, version 4.92).
Statistical Analysis Statistical analysis was carried out using Analyse-it for Microsoft Windows (Version 4— http://www.analyse-it.com ).
Statistical analysis was undertaken using Analyse-it for Microsoft Excel, and significance was assumed at the p <0.05 level.
The statistical analysis was carried out using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analyses were carried out using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis was performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
The statistical analysis was conducted using Analyse-it (Analyse-it Software Ltd, Leeds, UK), with results of measurements expressed as median and interquartile range (IQR).
Data analyses using Passing–Bablok regression and difference plots were performed using the Analyse-It add-in in Microsoft Excel (Analyse-It Software, Leeds, United Kingdom).
…for Windows (IBM SPSS, IBM Corporation, Chicago, Illinois) and the statistics add in software for Microsoft Excel Analyse‐it (Analyse‐it, version 2.03, Leeds, UK).
Data were analysed with a statistical software (analyse‐it v.2.30 by Analyse‐it Software.Ltd.,Leeds, LS3 UK).
Statistical Analysis Statistical analysis was performed in an Excel spreadsheet using a specific software (Analyse-it, Analyse-it Software Ltd., Leeds, UK).
The Wald test was employed to calculate the kappa value and was performed using the Analyse-it software, version 5.65.3.
The statistical analysis was carried out using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
The statistical analysis was carried out using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis was performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis Analyses were performed using Analyse-it Ultimate Edition (Analyse-it Ltd, Leeds, United Kingdom).
The data evaluation was performed using Microsoft Excel and the Analyse-it method validation edition software (Analyse-it Software, Leeds, UK) [ 22 ].
All statistical analyses were performed using SPSS version 23.0 (IBM Corp., Armonk, NY, USA) and the Analyse-it version 5.01 (Analyse-It Software, Ltd., Leeds, UK) add-on in Microsoft Excel 2016 (Microsoft Corp, Redmond, WA, USA).
Statistical analyses were conducted using Analyse-it v.5.11 Method Evaluation edition (Analyse-it Software, Ltd., Leeds, UK).
Statistical analysis Statistical analysis was performed using Microsoft Excel (Microsoft Corporation, Redmond (WA), USA) and Analyse-it Method Evaluation Edition version 5.11 software (Analyze-it Ltd., Leeds, UK).
…23.0 (IBM Corp., Armonk, NY, USA) and Microsoft Excel 2010 (Microsoft Corp., Redmond, Washington, USA) with Analyse-it version 5.11 (Analyse-it Software Ltd., Leeds, UK).
MedCalc Statistical Software version 19.1.7 (MedCalc Software Bvba, Ostend, Belgium) and Analyse-it for Microsoft Excel 5.30.2 (Analyse-It Software, Ltd., Leeds, United Kingdom) were used for statistical analyses.
Statistical calculations were performed with Microsoft Excel 2010 (Microsoft Corp., Redmond, WA, USA), and the Bland-Altman method was performed using Analyse-IT software (Analyse-IT software Ltd., Leeds, UK).
For statistical analysis, the Analyse-it ® software version 4.92 (Analyse-it Software, Ltd., Leeds, United Kingdom) was used.
An independent t-test was performed using Microsoft Excel Analyse-it Standard Edition v5.50 to determine the significance of mean value differences at the level of significance of 0.05.
The analysis was performed using SPSS version 23.0 (IBM Corp., Armonk, NY, USA) and Analyse-it version 5.01 (Analyse-it Software, Ltd., Leeds, UK) in Microsoft Excel 2010 (Microsoft Corp, Redmond, Washington, USA).
Confidence intervals of the LRs were calculated using the Miettinen and Nurminen method (Analyse‐it Software).
All statistical analyses were carried out with the Microsoft Excel 2010 add-in Analyse-it (Method Validation edition; Analyse-it for Microsoft Excel 5.11) or the statistic software MedCalc (Version…
Data analysis We used Analyse-it® for Microsoft® Excel 5.11 for all statistical analyses.
Statistical analysis All statistical analyses were conducted using the Microscoft Excel + Analyse-it ® software for Windows 10 (Analyse-it, Leeds, United Kingdom).
Statistics were run with Analyse-it v 5.01 (Analyse-it Software Ltd., Leeds, United Kingdom) statistical analysis add-in software for Excel (Redmond, WA, USA).
Statistics A stepwise multiple regression model was created using Excel with Analyse-it add-in linking as outcome level of hospital activity of each class/head of population for T1DM and T2DM at GP…
Analyses were performed using SPSS V.25.0 (IBM SPSS Statistics, Armonk, New York, USA) and Microsoft Excel Analyse-It (2010).
Statistical Analysis Statistical analysis of the data was performed using SigmaStat ® 3.5 Advisory Statistics for Scientists (Systat Software, Richmond, CA) and Analyse-it (Analyse-it Software Ltd., UK).
All analyses were performed using Analyse-It for Excel ( https://analyse-it.com ; Analyse-it Software, Leeds, UK).
ROC analyses were performed using analyse-it™ software for Excel (Microsoft, Redmond, WA, USA) to: (i) confirm the cut-off values, prospectively proposed by…
Data analyses were conducted using Analyse-it Version 5.11.1 (Analyse-it Software, Ltd., Leeds, UK).
Data analyses were conducted using the Analyse-it version 4.95.4 (Analyse-it Software, Leeds, UK).
Statistics and Ethics Committee Approval The statistical analysis was carried out using Analyse-it (Version 2.30; Analyse-it Software Ltd., Leeds, UK), setting statistical significance at p < 0.05.
All statistical analyses were performed using Microsoft Excel 2010 (Microsoft Corporation, Redmond, WA, USA), Analyse-it for Microsoft Excel Method Evaluation Edition version e.76.1 (Analyse-it Software Ltd., Leeds, UK), and psych…
For statistical analysis, the Analyse-it® software version 4.92 (Analyse-it Software, Ltd., Leeds, United Kingdom) was used.
For statistical analysis, the Analyse-it ® software version 4.92 (Analyse-it Software, Ltd., Leeds, United Kingdom) was used.
Statistical analysis was undertaken using Analyse-It statistical add-in for Microsoft Excel using Friedman test and Wilcoxon/Mann Whitney tests as appropriate.
The PCA analyses for DEGs and DESs were obtained from GeneSpring software version 14.5 (Agilent Technologies) and Analyse-it Software versión 5.4, respectively.
Statistical Analysis Results of PCO, CRP and PON-1 were correlated to each other using a Spearman correlation test run in an excel-based specific software (Analyse-it v 4.90, Analyse-it software Ltd, Leeds, UK).
Statistical analysis Statistical analysis of the data was performed with Microsoft Excel 2010 (Microsoft, Seattle, WA, USA) implemented with the statistical module Analyze-it (Analyse-It Software Ltd., Leeds, UK).
The statistical analysis was performed with Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical Analyses Data were analyzed using Analyse-it for MS Excel 5.40 (Analyse-it Software Ltd., Leeds, UK).
Receiver operating characteristic (ROC) curve analyses were conducted using Analyse-it (Analyse-it Software, Ltd., Leeds, UK) to evaluate the assay performance and visualize the curves.
Data analysis was performed using SIMCA Software, version 15.0.2 (Umetrics, Umea, Sweden), Microsoft Excel with the Analyse-it add-in, version 4.81.6, and IBM SPSS Statistics for Windows, version 23 (IBM Corporation, Armonk, NY, USA).
This analysis included all individual data points as opposed to average values using Analyse-It software, version 5.01.
All statistical analyses were performed using Microsoft Excel 2016 (Microsoft, NY, USA) and Analyse‐it (Analyse‐it Software Ltd., The Tannery).
Analyse-it v5.10 (Analyse-it Software, Leeds, UK) was used for graphical analyses.
Percent positive or negative agreement for categorical variables was calculated in Microsoft Excel software using the Analyse-it software package.
2.1.3 Statistical analysis For statistical analysis Analyse-it (version 5.65) for Microsoft Excel was used.
Analyse-it software (Analyse-it Software, Ltd., The Tannery 91 Kirkstall Road, Leeds, LS3 1HS, United Kingdom) was used to perform the reported statistical analysis.
19 Statistical analysis Statistical analyses were performed with Analyse-it, version 5.1 (Analyse-it Software, Ltd., Leeds, UK), SPSS Statistics for Windows, version 24.0 (SPSS Inc.,…
The statistical analysis was carried out with Analyse-it (Analyse-it Software Ltd, Leeds, UK).
The statistical analysis was performed with Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis was performed with Analyse-it for Microsoft Excel Ver.
All variables collected were processed using Prism, Version 6 (GraphPad Software, USA) and Analyse-it Method Validation Edition, Version 5.2 (Analyse-it Software, USA).
…inspection of QQ plots and Kolmogorov‐Smirnov tests with alpha = .010 using commercially available software (Analyse‐It v2.20, Analyse‐it Software, Ltd, Leeds, United Kingdom).
Statistical analysis Statistical analysis was performed using an Excel spreadsheet and specific software (Analyse‐it, Analyse‐it Software Ltd, Leeds, UK).
Statistical analysis was performed using Analyse-It 4.65.2 (Analyse-it Software Ltd, UK) for Excel.
Statistical Analysis Statistical inference was performed using the Analyse-it software (Analyse-it Software, Ltd., Leeds, UK).
The spectral data of the nine spectra achieved were processed with Principal Component Analysis (PCA) by using Analyse-it ® for Microsoft excel statistical software.
16.0.4266.1001; Santa Rosa, CA) and Analyse-it for Microsoft Excel (ver.
All statistical analyses were performed using IBM SPSS Statistics 23rd version and Analyse-it for Microsoft Excel 4.18.6 (Analyse-it Software, Ltd).
Correlation studies were analysed using Analyse-it for Microsoft Excel 5.30.1, build 7059.19477.
Statistical analysis was done by use of Analyse-it for Excel (version 5.40.2).
Repeatability and Bland-Altman tests were carried out using the Analyse-it plugin for excel (v.
Statistical analysis was done using software (Analyse-it Software, Ltd.
…for Statistical Computing, Vienna, Austria), PASW software, version 18.0 (SPSS Inc., Chicago, IL, USA), and Analyse-it Method Evaluation Edition software, version 2.26 (Analyse-it Software Ltd., Leeds, UK).
Statistical Analysis Analyse-it software (Analyse-it Software, Ltd., Leeds, UK) was chosen for the statistical analysis.
Reference intervals were established from breast stage partitions by resampling to 500 bootstrapped data points using the Analyse-it (Analyse-it, Leeds, UK) extension in Microsoft Excel (Microsoft, Redmond, WA, USA).
Statistical analysis was carried out using the analysis of variance (ANOVA) software (Analyse-it Software Ltd., Leeds, WY, UK).
Statistical analyses were performed with StatSoft Statistica v10.0 and Analyse-It for Microsoft Excel v3.53.
Statistical analyses were performed using Analyse-it Version 5.11 Software (2008, Leeds, United Kingdom) 3.
Statistical analyses The statistical tests in this study were conducted using Analyse-it® 3.90.4 (Analyse-it Software, Ltd., Leeds, UK) and R 3.5.3 (R Foundation for Statistical Computing, Vienna, Austria).
The statistical analysis was then carried out with Analyse-it (Analyse-it Software Ltd, Leeds, UK) and MedCalc statistical software (MedCalc Software, Ostend, Belgium).
Weighted Deming regression was applied by method comparison function in Analyse-it for Excel (version 2.30).
…direct comparison of Roche Elecsys and Beckman Coulter Access derived paediatric AMH values was performed using Analyse-it software (Version no.
Statistical analyses were performed using Analyse-it version 2.20 ( http://www.analyse-it.com/ ).
MedCalc software (Mariakerke, Belgium) was used for ROC curve analysis and all statistical analyses were performed using GraphPad Prism Version 5 and Analyse-it Version 4.10.2.
Data analysis was performed using Analyse-it for Microsoft Excel 4.0 (Analyse-it Software Ltd., Leeds, UK) and XLSTAT ® software (Addinsoft, Paris, France).
Statistical tests were performed with the Analyse-it® software version 4.92 (Analyse-it Software, Ltd., Leeds, United Kingdom).
Analyse-it ® software version 3.80 (Analyse-it Software, Ltd., Leeds, UK) was used for statistical analysis.
All results were compiled in a table calculation program, and the Microsoft Excel add-in “Analyse-it” was used for statistical analyses (Analyse-it for Microsoft Excel 2010, Analyse-it-Software, Ltd.
The c-statistics for receiver operating characteristic curve will be calculated using Analyse-It for Excel, with the Delong-Delong comparison for c-statistics.
Analyse-it for Microsoft Excel was used for all statistical analyses.
Statistical analysis was performed by using Analyse-it software for Microsoft Excel (Analyse-it Software, version 4.51, Ltd, http://www.analyse-it.com/ ; 2009) and IBM SPSS Statistic (v.19).
All variables collected were processed using Prism, Version 6 (GraphPad Software, San Diego, USA) and Analyse-it Method Validation Edition, Version 5.2 (Analyse-it Software, Leeds, UK).
Data were analysed with Microsoft Excel, Analyse‐it Version 2.22 (Analyse‐it Software Ltd, Leeds, UK), spss Statistics for Windows version 22.0 (IBM Corp., Armonk, NY, USA) and R version 3.4.0 16 .
Statistical analysis was performed using Analyse‐it for Microsoft Excel (version 2.30) using cutoffs ranging from ≥0.5 to ≥4.5.
2.8 Statistical analysis Reference interval studies data were analyzed using Microsoft Excel 2010 (version 14.0) and the data analysis add‐on package Analyse‐It (version 3.90.1).
Statistical analyses All statistical analyses were performed by Excel 2013 (Microsoft, Seattle, WA, USA) and Analyse‐it ™ software, version 3.90.5 (Analyse‐it Software Ltd, Leeds, UK).
Data preprocessing and statistical analyses were performed using Analyse-it for Microsoft Excel Method Validation Edition (version 2.20) and STATISTICA v.12 (StatSoft, OK, USA) software.
Statistical analyses were performed with StatSoft Statistica v10.0 and Analyse-it for Microsoft Excel v3.53 software.
The statistical analysis was carried out with Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analyses Statistical values for distributions were calculated using Analyse-it for Microsoft Excel 4.65.3 (Analyse-it Software, Ltd., Leeds, UK, 2017).
Statistics Bland–Altman plots were evaluated using Analyse-It, Version 2.04 (Analyse-It Software, Leeds, UK).
The statistical analysis was performed with Analyse-it (Analyse-it Software Ltd, Leeds, UK) and MedCalc Version 12.3.0 (MedCalc Software, Mariakerke, Belgium).
Statistical analysis was by analysis of variance followed by Dunnett testing for multiple comparisons using Analyse-it for Microsoft Excel 4.51 (Analyse-it Software, Ltd).
Descriptive statistics, Spearman correlations, Passing‐Bablok agreement curves, and difference diagrams were obtained with Analyse‐It (Leeds, United Kingdom).
The coefficient of determination (R 2 ), means, standard deviations (SD), and coefficients of variation (CV % = SD÷mean × 100) were calculated using Analyse-it for Microsoft Excel version 5.01 (Microsoft, Redmond, WA, USA).
Statistical Methods The acquired data were analysed and presented statistically using STATISTICA software (StatSoft, Tulsa, Oklahoma, USA), and presented figures were performed by Analyse-it Software Ltd.
Statistical analyses were performed with SPSS (SPSS Inc., Chicago, IL) and Analyse-it (Analyse-it Software, Ltd., Leeds, UK) packages.
Statistical analyses were performed with the use of the statistical packages GraphPad Prism version 7.04 for Windows (GraphPad Software, San Diego, CA, USA) and Analyse-It for Microsoft Excel 5.11 (Analyse-it Software, Leeds, UK).
Statistical analysis Statistical analyses were performed using Analyse—it Method Evaluation Edition software version 5.30 (Analyse-it Software Ltd., Leeds, UK).
All statistics were calculated using Analyse-it for Microsoft excel 4.18.1 (Analyse-it Software, Ltd.).
Statistical analysis was performed using Analyse-it version 5.11 / 2.30 (Win) / 2018 for Windows.
Statistical analysis of the study was made with the Analyse-it Software program (Analyse-it Ltd.
Microsoft Excel + Analyse‐it 2010 (Microsoft, Redmon, MA) was used to perform data analysis and to prepare figures and tables for publication.
Analyse-it version 5.01 (Analyse-it Software, Ltd., Leeds, UK) was used for statistical analysis.
2.1 Statistical analysis All statistical analysis was performed using Analyse-it version 4.8 and SAS JMP 12.
The RI (2.5–97.5th percentile) was estimated using nonparametric estimation combined with bootstrap resampling (Analyse-it Software Ltd., Leeds, United Kingdom).
All statistical analyses were performed using Analyse‐it 4.81.1 for Microsoft Excel (Analyse‐it Software, Leeds, UK), MedCalc 17.5.5 (MedCalc Software, Ostend, Belgium),…
Finally, comparison of different phyla, classes and orders relative abundance among groups was performed using Analyse-it for Microsoft Excel.
http://www.R-project.org ) including the standard-package splines respectively the optional package mfp (version 1.5.2) and the Analyse-it® software version 4.92 (Analyse-it Software, Ltd., Leeds, United Kingdom) were used.
Statistical analysis was conducted with commercially-available software (Analyse-it Software, v4.5.1 and Med Calc, Microsoft partner, v17.2).
To determine diagnostic usefulness of 6TG and 6MMP for detecting clinical outcome, receiver operating curve (ROC) was used and areas under the curve were calculated with Analyse-it version 4.96 (Analyse-it Software, Leeds, United Kingdom).
Statistical tests (Student’s t-test and ANOVA) for analysis of relative telomere length measurements were performed with the Analyse-it software for Microsoft Excel (version 2.20).
Statistical analysis Statistical analyses were carried out using the Analyse-it program (Analyse-it software, Leeds, UK).
All statistical analyses were performed using Analyse-it, version 4.65 (Analyse-it Software, Ltd., Leeds, UK).
Statistical analyses were conducted using Microsoft Excel (2010) with Analyse-it (Ver.
Statistical analyses were performed using MedCalc version 14.12.0 (MedCalc Software, Ostend, Belgium) and Analyse-it for Microsoft Excel, version 4.65.2 (Analyze Software, Leeds, UK).
Statistical analyses were performed using a software package (Analyse-it, version 3.90.7).
Statistical analysis All analyses were performed using Analyse-it 4.92.4 (Analyse-it Software Ltd., Leeds, UK).
DeLong’s test was used to compare the AUC from each of models [ 17 ], which were analysed by use of Analyse-it software programme.
Statistical analysis All data analysis and calculations were performed using Analyse-It software V.4.0 (Analyse-IT Software, Leeds, UK) and Windows Excel.
Statistical analysis Statistical analysis was performed using Analyse-it (Analyse-it Software Ltd., Leeds, UK).
Statistical analyses were performed using Analyse-it® for Microsoft Excel 3.90.7 (Copyright 1997-2016, Leeds, England).
Statistical Analysis Data were analyzed with the SAS v9.3 program (SAS, Cary, NC), Analyse‐it software (Analyse‐it, Leeds, UK), and Microsoft ® Excel software (Microsoft, Redmond, WA).
Statistical Analysis Data of the interlaboratory reproducibility study was analyzed with the SAS® v9.3 program (SAS, Cary, NC), Analyse‐it® software (Analyse‐it, Leeds, UK), and Excel software (Microsoft®, Redmond, WA).
All statistical analyses were carried out using Analyse-It software (Analyse-It software Ltd., Leeds, UK) for Microsoft Excel.
The comparison between the two immunoassay measurement methods (Passing-Bablok regression and Bland-Altman plot) has been carried out using the software Analyse-It (Analyse-it Software, Ltd., Leeds, United Kingdom, Version 4.80.2).
The c-statistic for the receiver operating characteristic curve will be calculated using Analyse-it for Excel (Analyse-it, Leeds, UK) with the Delong–Delong comparison for the c-statistic.
All calculations were performed using Microsoft Office Excel (Microsoft Inc., Redmond, WA) and add-in Analyse-it statistics software, version 4.10.2 (Analyse-it Software, Ltd., Leeds, UK).
Subjects' data were examined by Pearson and Spearman correlations using Analyse-it Software (Analyse-it Software, Ltd.
Statistical Evaluation All statistical analyses were performed by Analyse-it ® for Excel method evaluation software (version 4.81.1; Leeds, UK) and the Python Scipy module.
The Analyse-It statistical package for Excel 2010 was used to calculate the ROC AUC values for these voxel counts.
Analyse-it for Microsoft Excel 4.0, and Medcalc 15.8 (Medcalc Company), were used for statistical analysis in this study.
Summary and inferential statistics were calculated using Excel version 16 (Microsoft Corporation, Redmond, WA, USA) and Analyse-it version 4.65.3 (Analyse-it Software, Ltd, Leeds, UK).
This curve was drawn with Analyse-it software (Analyse-it Software, Ltd., Leeds, United Kingdom) using the concentration obtained for each diluted sample and the patient's CDI status, as determined by laboratory case definition.
…were performed using PASW software, version 24.0 (formerly, SPSS Statistics) (SPSS Inc., Chicago, IL, USA) and Analyse-it Method Evaluation Edition software, version 2.26 (Analyse-it Software Ltd., Leeds, UK).
Statistical Analysis All statistical analyses were performed by Analyse-it ® for Excel method evaluation software (version 3.90.1; Leeds, UK).
Statistical analysis The statistical analysis was performed using Analyse-it™ software, version 3.90.5 (Analyse-it software Ltd; Leeds, UK).
For all calculations, the Analyse-it® software version 4.92 (Analyse-it Software, Ltd., Leeds, United Kingdom) was used.
Statistical analyses were conducted using SAS System software (version 9.3, SAS Institute Inc., Cary, NC, USA) and Analyse-it (version 2.26, Analyse-it Software, Ltd., Leeds, United Kingdom).
Statistics and Reproducibility Statistical analysis was done with the Analyse-It plugin for Microsoft Excel.
…computations were performed with SPSS version 24 (IBM, Armonk, USA), State SE version 15 (StataCorp, Texas, USA), Analyse-IT (Analyse-it Software, Ltd., Leeds, UK) and GraphPad Prism version 5 (GraphPad software, San Diego, USA).
For all calculations, Analyse-it software (Leeds, United Kingdom) for Microsoft Excel was used.
The statistical analysis was performed with Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analyses were performed using Analyse-it software for Microsoft Excel (v 2.30).
The exact p value of the Wilcoxon Mann–Whitney statistics was computed using Analyse-it® v2.22 statistical analysis software for Microsoft Excel.
RESULTS: Data were analyzed using custom software written in Excel Visual Basic and the Excel add-on statistical package, Analyze-it (Analyse-it Software, LTD).
RESULTS: Data were analyzed using custom software written in Excel Visual Basic and the Excel add-on statistical package, Analyze-it (Analyse-it Software, LTD).
For all statistical analyses, the Analyse-it ® software version 4.92 (Analyse-it Software, Ltd., Leeds, United Kingdom) was used.
Analyse-it, a plug-in for Excel, was used for correlations and AICc line fits.
The statistical analysis was performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis was by ANOVA testing followed Dunnett’s testing for multiple comparisons using Analyse-it for Microsoft Excel 4.51 (Analyse-it Software, Ltd.).
Statistical analysis Statistical calculations were performed with the Fisher’s exact test and the Pearson’s chi-square test using the Analyse-it v2.26 software (Analyse-it Software Ltd, Leeds, United Kingdom).
Statistical analysis (Kruskal‐Wallis followed by Scheffé multiple comparisons) was performed by Analyse‐it Software, ltd.
Statistical analyses were undertaken using Analyse-It version 2.2 (Leeds, UK) and SPSS Statistics for Mac version 23.0 (IBM, New York, USA).
(Analyse-it Software, Ltd, Leeds, UK).
Relationships among isolates and sampling sites were explored with principal component analysis using software Analyse-it ® (Analyse-it Software Ltd, Leeds, UK).
14.12.0; MedCalc Software, Ostend, Belgium) and Analyse-it for Microsoft Excel software (ver.
Statistical analysis was performed by using Analyse-it Software (version 3.90.5 Analyse-it Software, Ltd., Leeds, UK) and MedCalc Software (version 14.12.0, MedCalc Software, Mariakerke, Belgium).
Statistical analysis Statistical analyses were performed by using Excel (Microsoft, Redmond, WA, USA) and Analyse-it (Analyse-it Software Ltd., Leeds, United Kingdom).
All statistical analyses were performed with Analyse-it (Analyse-it-software, Leeds, UK).
Statistical analysis was performed by using the Analyse-it software, version 3.90.5 (Analyse-it Software Ltd., Leeds, UK) and MedCalc software, version 15.2.2 (MedCalc Software bvba, Ostend, Belgium).
Statistical analysis Data was analyzed by using Analyse-it Method Evaluation Edition, version 3.76 software (Analyse-it Software Ltd., Leeds, UK) and IBM SPSS Statistics 22 (International Business Machines Corp., Armonk, NY, USA).
The statistical analysis was performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK) and MedCalc Version 12.3.0 (MedCalc Software, Mariakerke, Belgium).
8.1, OriginLab, Northampton, MA, USA) and the Analyse-it Method Evaluation for Microsoft Excel (v.
For this purpose, one-tailed hypothesis test with 95% confidence interval was performed using Analyse-it Software, Microsoft®, USA, which works compatible with Microsoft Excel.
…analysis was performed using the Analyze-It plug-in for Microsoft Excel (Analyze-It Software, Ltd.; https://analyse-it.com/ ), and branching and migration data were compared using a two-tailed student t -test, with α set to 0.001…
…hyperplasia, OAB overactive bladder, NB neurogenic bladder, XGP Xanth pyelonephritis Statistical analysis Analyse-it version 3.90.5 (Analyse-it Software, Leeds, UK) was used to generate all scatter plots, receiver operating…
The differences between proportions were analyzed using Fisher's exact test using Analyse-It 1.71 software (Analyse-It Software, Leeds, UK).
…performed by using the relative fold-changes (V2/V1 and V3/V1) calculated for all three cohorts with the help of Analyse-it for Microsoft Excel 4.51 software.
Statistical analyses were performed on Analyse-it (Analyse-it Software, Ltd., United Kingdom).
Statistical analysis Statistical analyses were made using Analyse-it Standard Edition 3.20 (Analyse-it Software, Ltd.
Statistical analyses Data was analyzed using Stata 13.0 (StataCorp, College Station, TX, USA) and Analyse-it software (Analyse-it for Microsoft Excel (version 2.20) Ltd.; 2009).
Statistical analyses Statistical analyses were performed using Analyse-it® for Microsoft Excel version 1.0.5.0 (Analyse-it Software, Ltd., Leeds, United Kingdom) and GraphPad Prism 5.03 (GraphPad Software, Inc., CA, USA).
The c-statistic for receiver operating characteristic curve was calculated using Analyse-It for Excel with the Delong-Delong comparison for c-statistic.
Analyses were performed using SPSS (IBM SPSS Statistics for Windows, V.20.0, Armonk, New York, USA: IBM Corp) and Microsoft Excel 2010 with Analyse-It statistical add-on (V.2.30).
Statistical calculations and charts were made with Analyse-it ® v2.11 for Excel ®.
Analyse-it programme, which works with Microsoft Excel, was used for making ROC curves with all the default parameters.
Only available data were included as part of the analysis and all statistical analyses and graphics were examined using Analyse-it® version 2.22 (Analyse-it Software Ltd., Leeds, UK) and EP Evaluator (EE) (Data Innovations, LLC, USA).
Analyse‐It program (with Microsoft Excel) was used for calculating area under the curve (AUC) values of ROC curves with all the default parameters.
Statistical analysis Statistical analysis was performed using Analyse-It plugin (Leeds, United Kingdom) for Microsoft Excel 2003 software.
The data analyses were performed using Microsoft Excel and Analyse-it Method Validation edition (Analyse-it Software, Leeds, UK).
14) software (VSN international Ltd., Hempstead, England) whereas paired t -test was performed using Microsoft Excels' add-in Analyse-it (Analyse-it Software Ltd., The Tannery, 91 Kirkstall Road Leeds, LS31HS, United Kingdom).
Analyse‐it for Microsoft Excel (version 2.20) [computer program].
Analyse-it software (Analyse-it Software Ltd, Leeds, UK) was used for all statistical analyses.
Statistical analysis Statistical analysis was carried out with the Analyse-it software, version 2.22, Microsoft Excel (Analyse-it Software, Ltd.) by 2-way unpaired t -test.
Analyse-it for Microsoft Excel 4.0 (Analyse-it Software, Ltd.
Statistical Analysis All statistical analyses were performed using the Analyse-it® software for Microsoft Excel.
Data are presented as median, interquartile and full range, and statistical analysis was undertaken using Analyse‐it Add‐in for Microsoft Excel (Analyse‐it Software Ltd., Leeds, UK).
The analysis and plots were carried out with Analyse‐it Software g Results There were 14 blood samples (13% of all 106 samples) from 14 different cats in which the…
Analyse-it (Analyse-it Software, Ltd, Leeds, UK) and SPSS (SPSS, Inc., Chicago, IL) software were used to analyze the data.
Analyse-it for Microsoft Excel (version 2.20) software (Microsoft, CA, USA) was used for all additional statistical tests.
The data were analyzed by using SPSS (Version 20; IBM Corporation, Armonk, NY, USA) and Analyse-it (Version 3.8; Leeds, UK).
Receiver operating characteristic (ROC) was determined using the software Analyse-it for MS Excel (Analyse-it Software, Ltd., Leeds, UK).
The statistical analysis was also based on non-parametric tests, entailing Wilcoxon test for paired samples, chi square test with Yates’ correction and Pearson’s correlation, using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
A Shapiro–Wilk W test of normality (Analyse-it, version 2.20; Analyse-it Software Ltd, Leeds, United Kingdom) revealed that all tested measures were not normally distributed; hence, all analyses were based on nonparametric tests.
The software packages Excel, Analyse-it V2.26 (both Microsoft Corp., Redmond, WA), and SPSS Statistics version 22 (IBM Corp., Armonk, NY) were used for statistical analysis.
The statistical evaluation was performed with Analyse-it for Microsoft Excel (Analyse-it Software Ltd, Leeds, UK).
Analyse-It program which works with Microsoft Excel was used for making ROC curves with all the default parameters.
…analyses were performed using PASW version 24.0 (formerly, SPSS Statistics) (SPSS Inc., Chicago, IL, USA) and Analyse-it Method Evaluation Edition, version 2.26 software (Analyse-it Software Ltd., Leeds, UK).
The statistical analysis was performed using the statistical software Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analyses were performed in Excel, Analyze-IT (Analyse-it Software, Ltd., Leeds, UK), SPSS v.21.0 (IBM, Zurich, Switzerland) and R version 3.2.1 (R Foundation for Statistical Computing, www.R-project.org ).
The statistical analysis was performed using Analyse-It (Analyse-it Software Ltd, Leeds, UK), a statistical add-in for Microsoft Excel.
Within-run and total imprecisions were calculated by Analyze-It Software version 2.22 for Microsoft Excel (Analyse‐it Software Ltd, Leeds, UK) and compared against published data.
The significance of differences was evaluated with Wilcoxon's signed rank test, using Analyse-it (Analyse-it Software Ltd., Leeds, UK).
For both ddPCR and qPCR, the data were exported to Microsoft EXCEL for further statistical analysis using the Analyze IT plugin (Analyse-it for Microsoft Excel (v.2.20) Analyse-it Software, Ltd.
Sample means and standard deviations (SD) were determined using Microsoft Excel (version 2.12; Analyse-it Ltd, Leeds, UK).
Only evaluable samples were analyzed using statistical software packages: SAS ® v9.3; Analyse-it ® v2.22; Microsoft ® Excel ® v12.0; and CBstat5 v5.1.0.
Data were analyzed using Analyse-It v1.72 (Analyse-It Software Ltd., Leeds, UK).
The method comparison simple linear regression and Bland Altman analysis were performed using Analyse-It Software, Leeds, United Kingdom.
Analyse-it ® software version 2.30 (Analyse-it Software, Ltd, Leeds, United Kingdom) was used for statistical analysis.
Data were analyzed by using Analyse-it (Analyse-it Software Ltd., Leeds, UK) and MedCalc Statistical Software version 15.2.2 (MedCalc Software, Ostend, Belgium).
Statistics All statistical analyses were performed by using Analyse-it, 3.90.5 (Analyse-it Software, Ltd, Leeds, UK).
Statistical Analyses Data were statistically evaluated using the Analyse-it for Excel software (Version 2.30; Analyse-it Software, Ltd., Leeds, UK).
Analyse-it (Analyse-it Software, Ltd., Leeds, UK) and SPSS (SPSS Inc., Chicago, IL, USA) software were used to analyze the data.
Statistical analysis The peak areas of citrulline and homocitrulline content between tissues (n = 195 divided in four groups) were assessed by Kruskal-Wallis test using Analyse-It version 2.26 for Excel 12+.
Statistical analysis Data were statistically evaluated using the Analyse-it software (Version 2.03; Analyse-it Software, Ltd., Leeds, UK).
The statistics were calculated using Analyse-it (version 2.30, Analyse-it Software, Ltd., Leeds, UK).
(BML=bone marrow lesion, CEA-BML=contrast enhancing areas of bone marrow lesion) Statistical analysis Data was analyzed using Analyse-it software (Analyse-it for Microsoft Excel (version 2.20) Ltd.; 2009).
…predictive values, negative predictive values and Wald ( χ 2 ) or z-statistics were calculated using Excel Analyse-it® v3.9.01.
Statistical analysis Data was analyzed using Microsoft Excel®, Reference Value Adviser© version 2.1 for Microsoft Excel®, Analyse-it® version 2.04 for Microsoft Excel®, and GraphPad Prism® version 6.
Kappa calculations were performed using Analyse-it for Excel (Microsoft, Redmond, WA, USA).
All statistical analyses were performed using the software program Analyse-it Software Ltd, Leeds, UK.
Data analysis was performed using Analyse‐it software (Analyse‐it software, Leeds, UK).
The SPSS (v19.0) and “Analyse-it”-Excel were used.
Analysis was performed using Analyse-it for Microsoft Excel version 2.20 (Analyse-it Software, Ltd.
22 Statistical analysis The Medcalc software (Medcalc, Belgium) and Analyse-it software (Analyse-it Software Limited, United Kingdom) were used.
Statistical analysis of data was performed with nonparametric Kruskal–Wallis test by Analyse-it software ver.
Statistics Comparing different ELISA assays, a Bland–Altman analysis was conducted using the software Analyse-it for Microsoft Excel (version 3.70.1).
Analyse-it (Analyse-it Software, Ltd., UK) and XLSTAT (Addinsoft, Paris, France) software were used for statistical analysis.
Box-whisker plots were generated and p values were calculated by the Student’s t -test using Analyse-it software (Analyse-it Software, Leeds, UK).
Statistical analysis Dedicated software were used for statistical analysis (R Foundation for statistical computing, Vienna, Austria, Analyse-it, Analyse-it Software, Leeds, England).
Univariate (Spearman’s rank correlation coefficient) and multivariate analyses were also performed using Analyse.it (Analyse-it Software Ltd, Leeds, UK).
The statistical analysis was performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
…Excel version 14 (Microsoft Corporation, Redmond, WA, USA), SPSS version 20 (SPSS Inc., Chicago, IL, USA) and Analyse-it version 3.76 (Analyse-it Software, Ltd., Leeds, UK).
Statistical Analysis Statistical analysis was carried out with Analyse-it statistical software for Microsoft Excel (version 2.26; Analyse-it Software, Leeds, UK).
All analyses were performed using Analyse-it for MS Excel Method Validation Edition (version 3.90.5), 2014 (Analyse-it Software, Ltd., Leeds, UK).
In addition, comparisons of c‐statistics were performed with Analyse‐it (Analyse‐it Software, Ltd., UK).
Statistical methods All statistical testing, production of box plots, and determination of p values were performed using the Analyse-it add-on (Analyse-it Software, Leeds, United Kingdom) for Excel (Microsoft, Redmond, WA).
Statistical analyses were performed with SPSS statistical software (version 22.0; IBM Corp., Armonk, NY) and Analyse-It for Excel ver.
Statistical analysis Data were statistically tested using Graph Pad Prism 5.04 (in vitro data, La Jolla, CA) and Analyse‐It v.2.26 (in vivo data, Leeds, UK).
Statistical analysis Differences between groups were tested using Kruskal–Wallis combined with LSD using Analyse‐it for Microsoft Excel (Analyse‐it Software, Ltd, Leeds UK).
…samples were included in the analysis using statistical software packages (SAS ® v9.3, SAS Institute, Cary, NC; Analyse-it ® v2.22, Analyse-it Software Ltd, Leeds, UK; Microsoft ® Excel ® v12.0, Microsoft, US, and CBstat5 v5.1.0, US).
Analysis was performed using the general statistics module of Analyse-it™ forMicrosoft Excel (Analyse-it Software, Ltd., Leeds, UK).
The statistical analysis was performed using Analyse-it software version 3.90.1 (Analyse-it Software Ltd.; Leeds, UK).
Statistical method In the current study, Origin Pro 8.0 (Origin Lab Corporation, USA) and Analyse-it Method Evaluation software (Analyse-it Software Ltd, UK, version 2.30) were utilized for the statistical analyses.
All statistical analyses were performed using Analyse-It® software for Microsoft Excel.
Statistical analysis was performed with one-way analysis of variance (ANOVA) followed by Bonferroni post-hoc test using the Analyse-it 2.16 statistics package for Microsoft Excel (Analyse-it Software, Ltd., Leeds, United Kingdom).
Statistical analysis The data were entered in an Excel (Analyse-it for Microsoft) database and analyzed with an SPSS version 19.0 (IBM SPSS statistics 19 SPSS Inc.) statistical…
Statistics Up to 22 different parameters per cat were statistically analyzed using Analyse-it ® for Microsoft Excel version 1.0.5.0 (Analyse-it Software, Ltd., Leeds, UK) and GraphPad Prism 5.03 (GraphPad Software, Inc., CA, USA).
The method comparison simple linear regression and Bland Altman analysis were performed using Analyse-it Software, Leeds, United Kingdom.
All statistical analyses were performed by using SPSS 20.0 trial version software for Windows (SPSS, Inc., Chicago, IL, USA) and Analyse-it (Analyse-it Software, Ltd., Leeds, UK).
We used Spearman correlation analysis to evaluate the correlations between spot urine and 24 hr urine markers, and all analyses were performed by using Analyse-it software (Analyse-It Software, Leeds, UK).
All statistical analyses were conducted by using the Analyse-it Method Evaluation Edition version 2.22 software (Analyse-it Software Ltd., Leeds, UK), GraphPad Prism version…
Statistics and mathematical formulae Statistical analysis was performed by using Microsoft Excel 2010 (Microsoft Corporation, Richmond, WA, USA) and Analyse-it (Analyse-it Software Ltd., Leeds, UK).
2007), GraphPad InStat (GraphPad Software, Inc.) and Analyse-it for Microsoft Excel v.
…variables) and the chi-squared test with Yates’s correction for continuity (for categorical variables), using Analyse-it (Analyse-it Software, Ltd, Leeds, UK).
Analyse-it® software version 2.30 (Analyse-it Software, Ltd, Leeds, United Kingdom) was used for statistical analysis.
Statistical analysis was performed using the Microsoft Excel (Microsoft Corporation, Redmond, WA, USA) and Analyse-It statistical add-on for Microsoft Excel (Analyse-It Software, Leeds, UK) for the Passing Bablok regression analysis.
Statistical analysis The statistical analysis was based on Chi-squared statistics with Yates’s correction, using Analyse-it (Analyse-it Software Ltd, Leeds, UK) and the statistical significance was set at P < 0.05.
Analyse-it (Analyse-it Software, Ltd., Leeds, UK) and SPSS version 14 (SPSS Inc., Chicago, IL, USA) software were used to analyse the data.
The statistical evaluation was performed within Microsoft Excel 2010 and its add-in Analyse-it Method Evaluation version 2.26.
Correlation analyses were carried out using Analyse-it for Excel [ 47 ], using the free statistical environment R [ 48 ] or using the statistical functions available in the base and correlogram libraries [ 49 ].
The Shapiro-Wilk’s test was used to test for normality of the data with the statistical software package Analyse-it® (Analyse-it Software, Ltd., Leeds, UK).
Statistical analyses were performed with SPSS (SPSS Inc., Chicago, IL) and Analyse-it™ (Analyse-it Software, Ltd., Leeds, UK) packages.
The statistical analysis was performed with Minitab 16 (Minitab Inc.), Analyse-it 2.3 (Analyse-it Software, Ltd.), and TIBCO Spotfire S-plus 8.1 (TIBCO Software Inc.) statistical software packages.
The statistical analysis was performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analyses were performed using Analyse-it ® Software Ltd (The Tannery, 91 Kirkstall Road, Leeds, LS3 1HS, UK).
Statistical analysis was determined by using Analyse-it v2.22 software (add-in for Microsoft Excel; Analyse-it Software, Ltd., Leeds, UK).
Box-and-whisker plots were generated using Analyse-it (Analyse-it Software, Leeds, UK).
Statistical analysis Data analysis was performed via Analyse-it for Excel version 2.30.
Statistical Analyses The data were statistically evaluated using the Analyse-it software (version 1.62; Analyse-it Software, Ltd., Leeds, UK).
The results were evaluated using Analyse-It(™) for Excel, Analyse-It Software, Ltd, Leeds UK.
Differences between groups were assessed with Wilcoxon-Mann-Whitney and Pearson’s χ 2 test with Yates’ correction (for categorical variables), using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
The results of all measurements were analyzed with Deming fit, Spearman’s correlation, kappa statistic, χ 2 square test with Yates’ correction and Bland & Altman plots, using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis was performed using Analyse-it statistical software for Microsoft Excel (version 2.26; Analyse-it software, Leeds, UK).
Statistical method Statistical analyses were performed using Analyse-It statistical Microsoft 2010 Excel add-in (version 3.70.1).
The Delong method was used to compare the areas under the curve between ROC curves 33 (Analyse-it Software, Ltd, Leeds, United Kingdom).
Statistical Analysis Statistical analysis was performed in an Excel 11 spreadsheet using the Analyse‐it software.
…Co Ltd, Tokyo 105‐0011, Japan 3 AU680, Beckman Coulter Inc, Brea, CA 4 SAS 9.3 software, SAS Inc, Cary, NC 5 Analyse‐it 2.26 software, Analyse‐it Software Ltd., Leeds, UK 6 Excel spreadsheet, Microsoft Corporation, Redmond, WA…
Statistical analysis and plotting were performed using Analyse-it ® for Microsoft Excel software.
Statistical analysis Data were analysed using Microsoft® Excel 2003 and Analyse-it® for Excel, version 1.73, or GraphPad Prism 6.04.
6 – 9 Statistics and ethics The data were analysed and graphed using XLSTAT (Addinsoft, USA) and Analyse-it software (UK), where appropriate.
Analyse-it Software for Microsoft Excel Version 3.90.1 (Analyse-it Software, Ltd., Leeds, UK) and Excel (Microsoft, Redmond, WA) were used to do the analysis.
…exact test [ 21 ]; JMP 11 software (SAS Institute Inc., Cary, NC, USA) to perform the Steel–Dwass test; and Analyse-it Version 2.30 software (Analyse-it Software Ltd., Leeds, UK) to perform other
Receiver-operating characteristic curves were mapped and compared for each scoring system (Analyse-it ® v3.90.1, Analyse-it Software Ltd, Leeds, UK).
Statistical analysis Statistical analyses were performed using Analyse—it Method Evaluation Edition, version 2.22, software (Analyse-it Software Ltd., Leeds, UK).
Analyse-it Software Ltd (Leeds, UK) was used to perform the Bland-Altman agreement statistics and to calculate the Bland-Altman difference plots.
Statistical analyses Statistical analyses were performed using the software online OpenEpi Software Version 2.3.1, Analyse-it SoftwareVersion 2.25, and Prism 5.0 (GraphPAD Software).
Statistics Deming regression, Pearson’s correlation and Bland-Altman plot were employed by Analyse-it software for Excel (version 2.30, Analyse-it Software, Ltd).
To compare diagnostic accuracy we calculated the area under the curve (AUC) for each strain parameter and operator and compared these using the Delong test (Analyse-it for Microsoft Excel 2.20, Analyse-it Software, Ltd., Leeds, UK).
For statistical analysis SPSS statistics (SPSS Inc., ver.15.0., Chicago, IL, USA), MedCalc v11.3.8.0 (Mariakerke, Belgium) and Analyse-it 2.13 (Analyse-it Software, Ltd., Leeds, UK) were used.
Receiver operating characteristic curve (ROC) analyses were performed using Analyse-It software for Excel (Microsoft).
Statistical tests were performed using Analyse-it v2.26 (Analyse-it Software, Ltd.
Passing and Bablok regression analyses were performed with Analyse-it software with proportional or absolute differences noted only if the 95%CI of the slope or intercept did not include 1.00 or 0 ng/L, respectively.
Passing–Bablok and difference plot analysis were done in Analyse-it v2.30 (Analyse-It Software Ltd, www.analyse-it.com).
The statistical analysis was performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK) and the level of statistical significance was set at p <0.05.
Med Calc 11.3 Statistical Package (MedCalc Software, Ostend, Belgium) and Excel 2007+Analyse.it (Analyse-It Software, Leeds, UK) were used for the calculations and graphs.
Passing-Bablok and Bias plots were made in Analyse-it (Analyse-it Software, Ltd).
Data were analyzed by Origin Pro 8.0 (Origin Lab Corporation, USA) and Analyse-it Method Evaluation software (Analyse-it Software Ltd, UK, version 2.30).
All the data were analysed using Origin Pro 8.0 (Origin Lab Corporation, USA) and Analyse-it Method Evaluation software (Analyse-it Software Ltd, UK, version 2.30).
Statistical method Statistical analyses were performed using Origin Pro 8.0 (Origin Lab Corporation, USA) and Analyse-it Method Evaluation software (Analyse-it Software Ltd, UK, version 2.30).
Significant differences between groups were examined using the nonparametric Mann-Whitney and Wilcoxon tests (small sample tests; Analyse-it software) unless specified otherwise, and p -values <0.05 were considered significant.
Data analysis and statistical analysis All statistical analyses were performed using Analyse-it (Analyse-it Software Ltd, The Tannery, 91 Kirkstall Road, Leeds, LS3 1HS, United Kingdom).
Statistical testing was performed either in BRB Array Tools version 4.2.1 Class Comparison using a T test or in Analyse-it version 2.26 (Leeds, UK) for Chi Square tests.
14 To find the most favorable CEDIA cutoff for buprenorphine in terms of highest specificity and sensitivity, we performed a receiver operating characteristic (ROC) analysis using Analyse-it (Analyse-it Software, Ltd, Leeds, UK).
Data were analyzed using Analyse-It version 2.22 (Analyse-It Software Ltd., Leeds, UK) for Microsoft Excel and JMP version 10.0.2 (SAS Institute Inc., North Carolina, USA).
Results of measurements were expressed as median and interquartile range (IQR) and differences were analyzed with Wilcoxon test for paired samples, using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Differences between groups were assessed with Wilcoxon-Mann-Whitney test (for continuous variables) and χ 2 test with Yates' correction (for categorical variables), using Analyse-it (Analyse-it Software Ltd., Leeds, UK).
2.11 Statistics Quantitative toxicity data were analysed using Analyse-it™ software embedded in Excel.
Statistical Analysis Statistical analysis was performed using SPSS Statistics 20.0 (SPSS Inc., Chicago, IL, USA) and Analyse-it 2.22 (Analyse-it Software Ltd., Leeds, UK).
ROC analysis was performed using Analyse-it for Microsoft Excel (version 1.71) (Analyse-it Software, Ltd.
Data analysis and statistics Receiver-operator characteristic (ROC) curve analysis [ 28 ] was performed using NMVs for the 67 EAC, 26 ESCC and 67 NE by Analyse-it software (Version 1.71, Analyse-it Software, Leeds, UK).
All computations were performed using Analyse-it software, 2011, (Analyse-it Software, Leeds, UK) except ROC curve analysis which was done with MedCalc 12.7 (MedCalc Software, Mariakerke, Belgium).
Statistical analysis The results were collected on a Microsoft Excel worksheet and analyzed for correlation (Spearman) and agreement (K statistic) by the Analyse-it software (Analyse Ltd, Birmingham, UK).
Statistical analysis Data were analyzed using STATA (version 12, Stata Corp., College Station, X, USA) and Analyze-IT software (Analyse-it for Microsoft Excel (version 2.20) Ltd.; 2009).
…analyses were conducted using ibm spss Statistics for Windows, Version 20.0 (IBM Corp., Armonk, NY, USA), Analyse-it® version 2.30 (Analyse-it Software Ltd, Leeds, UK), and graphpad prism ® version 6.0 (GraphPad software Inc., La…
Statistical Analysis Statistical analysis was done using a statistical software add-in for Microsoft Excel for Windows, namely, Analyse-it version 2.26 Excel 12+.
Statistics Statistical analyses were performed using Analyse-it (Analyse-it Software Ltd, Leeds, UK).
The statistical analysis was performed using Analyse-it ® for Excel version 2.26 (Analyse- it Software, Ltd., Leeds, UK).
The data were also analyzed with Analyse-it (Analyse-it Software, Leeds, UK).
12.0, Statsoft, Inc., Analyse-it v.3.53; Analyse-it Software Ltd, Tulsa, OK, USA).
Kruskal-Wallis test with Bonferroni error protection was applied for comparing the overall inhibition zones from the different EOs by using the Analyse-it software (Analyse-it Software, Ltd.).
Measurements Data collected were entered into Analyse-it v2.05 software (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis Statistical analysis was performed with a computer software package (Analyse-it, version 1.63, Analyse-it-software, Leeds, UK).
Analyse-it (Analyse-it Software, Ltd., Leeds, UK) and SPSS (SPSS Inc., Chicago, IL, USA) software were used to analyze the data.
Statistical analyses were performed using Analyse-it software for Microsoft Excel, version 2.20 (Analyse-it software, Ltd.
Kappa sensitivity and specificity statistical tests were evaluated by the Analyse-it 2.30 (Leeds, UK) and Excel 2003 (Microsoft Corp., Redmond, Washington, USA) programs.
Statistical Evaluation The data was statistically evaluated using the Analyse-it software (Version 1.62; Analyse-it Software, Ltd., Leeds, UK).
Statistical Analyses The data were statistically evaluated using the Analyse-it software (Version 1.62; Analyse-it Software, Ltd., Leeds, UK).
Statistical Analysis The data was statistically evaluated using the Analyse-it software (Version 1.62; Analyse-it Software, Ltd., Leeds, UK).
Statistical analysis Statistical analysis was performed using JMP version 9.0.3 (SAS Institute, Cary, NC, USA) and Analyse-it version 2.26 (Analyse-it Software, Leeds, West Yorkshire, UK).
Statistical analyses were performed with SPSS (SPSS Inc., Chicago, IL) and Analyse-it™ (Analyse-it Software, Ltd., Leeds, UK) packages.
Statistical Analysis Statistical analysis was performed using Analyse-It for Microsoft Excel, version 2.26 and SPSS, version 20.
Statistical Analysis Statistical analysis was carried out using Analyse‐it version 2.26 6 and SPSS version 19.0.
…Package for the Social Science, Software Packets for Windows, Version 20 9 GraphPad PRISM for Mac, Version 5.0 10 Analyse‐it Software Ltd, Leeds, UK References 1 Feldman EC , Mack RE .
All statistical analysis was performed in Excel (Microsoft) and the Analyse-it plug in for Excel (Analyse-it Software, Ltd).
All statistical analyses will be performed using the Analyse-it, add-in software for Excel.
Statistics The data were evaluated using the Analyse-it software (Version 1.62; Analyse-it Software, Ltd., Leeds, UK).
The Passing-Bablok regressions were performed with Analyse-it and all other analyses with Microsoft Excel.
Group means were analyzed for statistical significance using a t-test with the software Analyse-it for Microsoft Excel (Analyse-it Software, Ltd.
Statistical analysis Statistical analyses were performed using Analyse-it Method Evaluation Edition version 2.22 software (Analyse-it Software Ltd.; City West Business Park, Leeds, UK)…
The statistical analysis was performed with Analyse-it (Analyse-it Software Ltd, Leeds, UK) for Microsoft Excel (Microsoft Corporation, Redmond, WA, USA).
Statistical Methods Statistical evaluation was performed using Analyse-it software (Version 2.03; Analyse-it Software, Ltd., Leeds, UK).
…made against a control) or Bonferroni's test (when comparison was made between each pair of groups) by means of Analyse-it for Microsoft Excel, version 2.16 (Analyse-it Software, Ltd.).
Differences were considered significant at p<0.05 (Analyse-It statistical software, Leeds, UK).
Statistical analysis Statistical analysis was performed using Analyse-It® (version 2.21, Leeds, U.K.).
SAS v9.2 (SAS, Cary, NC) and “Analyse-It” v2.22 for Excel (Analyse-It Software, Ltd., Leeds, UK) were used to perform the analyses.
Data analysis Data analyses were performed using Analyse-It version 2.26 and SAS.
2.9 Statistical analysis Statistical analysis was performed in an Excel (Microsoft Corp, Redmond, WA, USA) spreadsheet using the Analyse-it software (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis Results were statistically tested using Analyse-it for Microsoft Excel (Analyse-it Software, Ltd, Leeds, UK).
10 (StatSoft, Inc., Tulsa, United States of America) and Analyse-it v.
Statistical analysis Data were analysed using Analyse-it Software Ltd.
…HSD post hoc (95% confidence) tests (when statistical differences of P ⩽ 0.05 were found) were performed using Analyse-it V2.2 Ltd (Leeds, UK).
Statistical methods and performance goals Statistical analyses were performed using a statistical software for Microsoft Excel (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis was performed using Analyse-It for Microsoft Excel (Analyse-It Software Ltd, Leeds, UK) and SPSS v17 (SPSS Inc., Chicago, IL, USA).
Statistical evaluation The data were statistically evaluated using the Analyse-it software (Version 1.62; Analyse-it Software, Ltd., Leeds, UK).
The significance of differences was assessed by Wilcoxon-Mann-Whitney test, using Analyse-it for Microsoft Excel (Analyse-it Software Ltd, Leeds, UK).
The statistical evaluation was performed with Analyse-it for Microsoft Excel version 2.24 (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis Data were evaluated using SPSS version 13.0 (SPSS Inc., Chicago, IL) and Analyse-It version 2.04 (Analyse-It Software, Leeds, UK).
Analyses were carried out using Analyse-it® for Microsoft Excel (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis was undertaken using the Analyse-It™ add-in for Microsoft Excel.
Statistical analysis Statistical analysis was done using Analyse-it 2.12 (Analyse-it Software, Ltd., Leeds, United Kingdom) and SPSS 11.0 for Windows (SPSS, Chicago, IL, US) A P -value < 0.05 was considered statistically significant.
Statistical Analyses Statistical analysis was performed using the software package Analyse-It (Analyse-It Software Ltd., Leeds, UK).
…Mann–Whitney U test and correlations were tested for with a Spearman’s rank correlation using a software program (Analyse-it Software Ltd, Leeds, UK).
Statistical Evaluation Data was statistically evaluated using the Analyse-it software (Version 2.03; Analyse-it Software, Ltd., Leeds, UK).
Statistical Analyses The data were statistically evaluated using the Analyse-it software (Version 1.62; Analyse-it Software, Ltd., Leeds, UK).
All the statistical analyses were performed with the Microsoft Excel add-in software, Analyse-it Standard Edition (Analyse-it Software Ldt, Leeds, UK).
Patients were then separated into two groups and analysed using Analyse-It software for Excel.
…tests were performed using MedCalc version 10.0.1.0 statistical software (MedCalc Software, Ostend, Belgium) and Analyse-it Standard Edition 3.02 software (Analyse-it Software, Ltd, Leeds, UK) for Microsoft Excel (Microsoft, Redmond, WA,…
…), with the “r” statistics package ( www.r-project.org ), and with various commercial software packages including Analyse-it ( analyse-it.com ) and MedCalc ( www.medcalc.org/ ).
Statistical analysis Descriptive statistical analysis of the data was accomplished using Analyse-it for Microsoft Excel (Analyse-it Software Ltd., Leeds, UK).
The datasets were tested for normality using the Shapiro–Wilk's test with the statistical software package Analyse-it® (Analyse-it Software, Ltd., Leeds, UK).
…14, 17.0) (SPSS Inc., Chicago, IL, USA) and PASW statistics 20.0 (IBM Corporation, Somers, NY, USA) while we used Analyse-it (version 2.22) free software for Bland-Altman plot analyses.
Statistical Analysis Statistical analysis was performed using IBM SPSS Statistics Ver.20 and Analyse-it for Microsoft Excel ( version 2.00 ) ( Analyse-it Software , Ltd.
Statistical analysis All statistical analyses were carried out using Analyse-it Method Evaluation Edition, version 2.22, software (Analyse-it software Ltd., Leeds, UK).
Data were analyzed with Analyse-it (Analyse-it Software, Ltd., Leeds, UK) version 2.26.
Data analyses for age, sex, etiology, site of fracture, and treatment given were performed using Analyse-it for Microsoft Excel 2012.
The ROC analysis was performed by a computer software program provided by Analyse-It Software, Leeds, UK.
Data were compared using ANOVA with a posthoc Tukey’s test (Analyse-it-for Microsoft Excel) with significance accepted at p < 0.05 and are expressed as mean ± SEM.
Analysis was performed using “Analyse-it” (The Tannery, 91 Kirkstall Road, Leeds, LS3 1HS, UK) and Microsoft Excel softwares (Thames Valley Park Reading, Berkshire, RG6 1WG, UK).
Statistical analyses were performed using OriginPro7 and Analyse-it for Excel (Analyse-it) and on-line servers ( http://www.graphpad.com/quickcalcs/index.cfm ; http://elegans.som.vcu.edu/~leon/stats/utest.html ).
Statistical analysis of the differences between experimental groups have been performed using non-parametric Kruskal-Wallis 1-way ANOVA by ranks test, using a 1.73 version of Analyse-it software add-in for Microsoft Excel (Windows version).
Analyses were performed using StatView 5.0 software (SAS, Cary, NC, USA) and Analyse-it for Microsoft Excel (version 2.20) (Analyse-it Software, Ltd.
…15.0, Chicago, Illinois, USA, www.spss.com ), except weighted Deming regression, which was analyzed using the Analyse-It software (Analyse-it Software Ltd, Leeds, UK, www.analyse-it.com ) for Microsoft Excel (Microsoft Corporation,…
Statistical analysis was performed by one-way Analysis of Variance (ANOVA) using Analyse-it software (Analyse-it Software, Ltd., Leeds, United Kingdom).
2.5 Statistical analysis Statistical analyses were performed using an Excel spreadsheet with the Analyse-it set of macroinstructions (Analyse-it Software, version 2.21).
Microsoft Excel ® was used for contingency table construction; the program Analyse-it ® (integrated into Microsoft Excel) was used for sensitivity, specificity, and predictive value calculations…
Data analysis and statistics ROC curve analysis 39 was performed using NMVs for the 67 EAC, 26 ESCC and 67 NE by Analyse-it software (Version 1.71, Analyse-it Software, Leeds, UK).
Calculations were performed using Analyse-It (Analyse-it Software, Ltd.; Leeds, UK), Excel (Microsoft, Unterschleissheim, Germany) and SPSS 19 (IBM, New York, United States).
…gap = ( Na + K ) − ( Cl + HCO 3 ) Statistical methods Data analyses were performed using statistical software (Analyse-it for Microsoft Excel ® version 2.20 Microsoft Office 2010, Analyse-it ® Software Ltd, http://www.analyse-it.com/ ,…
(1 – specificity) using Analyse–it for Microsoft Excel (version 2.2) software.
Statistical analysis Data were evaluated using SPSS version 13.0 (SPSS Inc., Chicago, IL, USA) and Analyse-It version 2.04 (Analyse-It Software, Leeds, UK).
…3.47 2.76 3.79 2.76 Statistical methods Data were evaluated using SPSS version 13.0 (SPSS Inc., Chicago, IL) and Analyse-It version 2.04 (Analyse-It Software, Leeds, UK).
Statistics were carried out using Analyse-it® for Microsoft Excel (Analyse-it Software Ltd, Leeds, UK).
All the analyses were done using Excel XP version (Microsoft Corp., Redmond WA) with the statistical add-in software package Analyse-it release 1.7 (Analyse-it Software, Leeds UK).
Analyse-it 2.0 software (Analyse-It, Ldt., Leeds, UK) was used for both tests.
Analyses were performed using Analyse-It for Microsoft Excel v2.22 (Analyze-It Software Inc., Leeds, England).
All statistical analyses were performed using Analyse-it for Microsoft Excel (2008) .
Calculations Statistical analysis was performed with commercial statistical software, “Analyse-It for Microsoft Excel v2.20”.
Receiver-operating characteristic analysis was performed using the software from Analyse-it (Leeds, UK).
Statistical analysis Descriptive statistics were performed by means of average, standard deviation, median, minimum and maximum, and box plots using Excel and Analyse-it Excel addin (Analyse-it Software Ltd, Leeds, UK).
2 Statistical analysis was performed using Analyse-it plugin (Leeds, England) for Microsoft Excel 2003 software.
“Analyse it” standard edition software produced by Analyse-it Software, Ltd.
Analyse-it (Analyse-it Software, Ltd., Leeds, UK) and Statistica (StatSoft Scandinavia AB, Sweden) were used for statistical analyses.
Statistical Analysis and Ethics Statistical analysis was made using Mann-Whitney test to compare groups and Chi-square test to compare frequencies using Analyse-It software v.
Statistics Analysis was undertaken with either the analyse-it statistical package version 2.2 or Microsoft Excel as appropriate [ 29 ].
Statistical analyses Most statistical analyses were performed with SPSS (version 14.0; SPSS Inc., Chicago, IL, USA), and Analyse-it (version 2.22) free software was used for the Bland-Altman plot analyses.
The statistical analyses were performed using the Analyse-it software (Analyse-it Software, Ltd, Leeds, UK).
Data analyses All calculations and statistical analyses were carried out with Minitab (Coventry, UK) and Analyse-It™ (Analyse-It Software, Leeds, UK).
ROC analyses were performed using analyse-it software for Excel (Microsoft, Redmond, WA, USA) to (i) confirm the cut-off values prospectively chosen for…
DPPH IC 50 values with 95% confidence intervals were determined using the regression method with the Analyse-it software.
Regression analysis was done using Analyse-it software [ 7 ].
Statistical Analysis Analyse-it Method Evaluation Edition version 2.27 software (Analyse-it Software Ltd., City West Business Park, Leeds, UK) was used for all statistical analyses.
Statistics and graphs Statistical analysis and box-plots were performed with Analyse-it (Analyse-it Ltd., Leeds, United Kingdom).
SAS v9.2 (SAS, Cary, NC) and “Analyse-It” v2.22 for Excel (Analyse-It Software, Ltd., Leeds, UK) were used to perform the analyses.
Statistical analysis was done using Analyse-it (version 2.20) statistics software for Microsoft Excel.
Data were analyzed with Analyse-It (Leeds, England).
Statistical analysis All statistical analyses were performed using the Analyse-it Method Evaluation Edition version 2.22 software (Analyse-it Software Ltd., Leeds, UK).
2005), StatXACT v.5.0.3, CYTEL SOFTWARE CORPORATION and Analyse-it Software v.1.68.
Statistical analysis was performed using ‘Analyse-it Software’ (City West Business Park, 3 The Boulevard, Leeds, LS12 6LX, United Kingdom).
Assays were repeated three times, and variations between the mean values were analyzed using the least significant difference correction for one-way analysis of variance (ANOVA) for multiple comparisons (Analyse-It for Microsoft Excel).
Results were analyzed using a statistical software package (Analyse-it Software, Leeds, UK) with an α level set at 5%.
2.4 Statistics Analyse-it for Excel (Version 2.11, 2008) was used for the statistical analyses; the statistic procedure applied being the Deming fit.
Statistical analyses The statistical analyses were done using Microsoft Excel Analyse-it software, Stata statistical package 10.1 (Stata-Corp.
Analytical statistics were performed by Analyse-it version 2.21 Excel 12+ (Analyse-it Software Ltd., Leeds, UK), a statistical add-in program for Excel (MS Excel Microsoft Corp, Phoenix, Arizona, USA).
Data were analyzed for each injection type and disease process separately, and also for all nine patients together using the Analyse-It software program (Analyse-It Software, Leeds, UK).
For comparison for the areas under the ROC curves (AUC) we used Analyse-it ® version 2.11, Analyse-it Software Ltd, Leeds, United Kingdom.
Receiver Operator Characteristic (ROC) was plotted using Analyse-it ® (Analyse-it Software, Ltd.) for Microsoft ® Excel™.
Statistical analysis The statistical analyses were performed using SPSS V11.0.1 (2001, SPSS Inc.), JMP V3 (SAS Institute, Cary, NC, USA, 1995), and Analyse-it (by Analyse-It Software Inc., England, UK, 2002).
All statistical calculations were made using the software program Analyse-It ® (Analyse-It Software, Ltd., Leeds, UK).
Where indicated, statistical significance was tested with chi-square test on frequency tables (Analyse-it for Microsoft Excel, Version 2.11, Analyse-it Software Ltd., 2008).
With the Analyse-it program (Analyse-it Software, UK), the χ 2 and one-tailed p values from the Mantel-Haenszel χ 2 test and the…
Distribution analysis was performed using Shapiro-Wilks test (Analyse-it Software Ltd., Leeds, UK), and univariate statistics were performed using either Mann-Whitney or Student's t-test…
Survival data from the mouse experiment were analyzed by Analyse-It for Excel.
Dot-plots were prepared with Analyse-it for Microsoft Excel v2.20 (Analyse-it Software, Ltd., Leeds, United Kingdom).
…characteristic (ROC) curves of the ratio values for antibody responses to each marker were plotted using Analyse-it software and the area under the curves and 95% confidence intervals (95% CI) for responses to each antigen were…
Data analysis Data were entered into a Microsoft Access database and analysed using Analyse-it for Microsoft Excel (version 2.11).
Calculations and Statistics Data were analyzed using Microsoft Excel 2003 and Analyse-it® (Analyse-it Software).
The ROC curves were compared by using Analyze-IT software for Microsoft Excel (Analyse-it Software, Ltd; Leeds, United Kingdom).
Analysis was carried out using Analyse-it for Microsoft Excel.
All statistical analyses were performed using the Analyse-It plugin for Microsoft Excel 2003 software (Leeds, UK).
Statistic analysis For receiver operator characteristics (ROC) analysis [ 34 ], we used Analyse-it® (Analyse - it Software, Ltd., Leeds, UK).
2.6 Statistical analysis Statistical analyses were performed with an Excel (Microsoft Corp, Washington, US) and the Analyse-it set of macroinstructions (Analyse-it Software, Leeds, UK).
Statistics Statistical analyses were performed using the Excel add-in Analyse-it (Analyse-it Software, Leeds, UK), and we used nonparametric tests.
Differences in arthritis scores were determined by the Fisher test with Analyse-it plug-in software (Analyse-it Software, Ltd., Leeds, UK) for Excel (Microsoft Corporation, Redmond, WA, USA).
Statistical evaluation The data were statistically evaluated using the Analyse-it software (Version 2.03; Analyse-it Software, Ltd., Leeds, UK).
AUC ROCs of potentially predictive parameters were compared using Analyse-it software (Analyse-it Software, Ltd., Leeds, UK).
All analyzes were performed using Analyse-it ® software (Analyse-it Software, Leeds, UK).
All statistical analyses were performed using Analyse-It plugin for Microsoft Excel 2003 software (Leeds, UK).
Analyses were conducted with Analyse it Software http://www.analyse-it.com Figure 3 Jerk Time Bland-Altman Graph .
…with ATP-TCA data by multiple linear regression using SPSS version 14.0 (SPSS Inc., Chicago, IL, USA) and Analyse-It software (Analyse-it Software Ltd, Leeds, UK) applications.
Statistics were carried out with a software program, Analyse-it ® (Analyse-it Software Ltd, Leeds, UK).
The comparison of mean values for each parameter was determined using the paired, two-tailed, Student’s t test with Analyse-it software (Leeds, United Kingdom) for Microsoft Excel.
All statistical analyses were performed using the Analyse-It plugin for Microsoft Excel 2003 software (Leeds, UK).
Statistical tools Statistical tests were performed by Analyse- it- for- excel, version 2.11, by Vassar Stats http://faculty.vassar.edu/lowry/VassarStats.html , accessed…
Spearman correlation was used to analyse quantitative agreement between methods and Cohen's kappa for qualitative agreement (Analyse-it for MS Excel).
Ryan, 2005) and Analyse-it for Microsoft Excel General & Clinical Laboratory modules Version 1.73 (Analyse-it Software, Ltd.
Comparison between ROC curves was performed according to the method described by Hanley and McNeil using Analyse-it Clinical Laboratory 2.12 (Analyse-It Software, Ltd.) [ 19 ].
Statistics The Microsoft Excel 5.0 program and Analyse-it (Analyse-it Software, Ltd, UK) were used for method comparisons.
ROC curve analysis was done using plasma expression level of each gene for the NSCLC patients, COPD patients, and normal controls by Analyse-it software (Analyse-it Software Ltd, Leeds, UK).
Statistical analysis Statistical analysis with Analyse-It Software (Leeds, UK) and using individual animal data was conducted on the extent of DNA migration as determined by the OTM and the % Tail, on the % LMW DNA and on the % MN-PCEs.
Thereafter the data was analyzed using the SPSS (17.0) and Microsoft Excel Analyse-It software programs.
All statistical analyses was performed using Analyse-It plugin (Leeds, UK) for Microsoft Excel 2003 software.
The working characteristics of the peptide antigens were explored by receiver-operating characteristics (ROC) plot analysis (Analyse-It, version 2.21).
…contributors are pooled into a simple equation and processed through the multiple regression analysis method of Analyse-It software package [48] , to derive the best fitting equation predicting the Tm values for the training dataset.
Data were analyzed using StatView™ (SAS, Cary, NC.) Receiver operator characteristic (ROC) analyses were examined using Analyse-it™ v 2.12 (Analyse-it Software, Ltd, Leeds, UK).
Relevant data were analyzed for statistical significance in the Student's t-test using Analyse-it for Microsoft Excel (version 2.03, Analyse-it Software, Ltd.) Cells H5V [27] , EOMA (ATCC CRL-2586), 1G11 [28]…
Statistical analysis All analyses were performed using Analyse-It (Analyse-it Ltd., Leeds, England).
…assessed using the Shapiro-Wilk and Kolmogorov-Smirnov tests using Unistat 5.0 (Unistat Ltd, London, England) and Analyse-it (Analyse-it Ltd, Leeds, England) softwares for Excel.
All the statistical analyses were performed in an Excel (Microsoft Corp, Redmond, WA, USA) spreadsheet with the Analyse-it set of macroinstructions (Analyse-it Software Ltd, Leeds, UK).
A logarithmic gene expression ratio (GER) was calculated as ln(2 -Ct [test] /2 -Ct [PBGD] ) and used for comparison with ATP-TCA data by multiple linear regression using SPSS ver 14.0 and Analyse-It software.
Statistical analyses will be performed by Analyse-it software (Analyse-it software, Ltd., Leeds, UK) [ 33 ] and by the SPSS 16.0 statistical package (SPSS, Inc., Chicago, IL, USA).
Statistical analyses were conducted using Analyse-it ® and Microsoft Excel ® .
Analyses were performed using Analyse-It for Microsoft Excel v1.71 (Analyze-It Software Inc., Leeds, England).
bovis , using Analyse-it software version 1.73 (Analyse-it Software, Ltd).
Statistical analysis A one-way analysis of variance test with Dunnett error protection and confidence interval of 95% was used from the Analyse-it for Microsoft Excel (Leeds, UK) [ 35 ] analysis of in vivo and in vitro treatments.
The Microsoft Excel 5.0 and Analyse-it for Microsoft Excel from Analyse-it Software Ltd programs were used to obtain the correlation functions and INR results.
Ryan, 2005) and Analyse-it for Microsoft Excel General & Clinical Laboratory modules Version 1.73 (Analyse-it Software, Ltd.
All statistical analyses were performed in Microsoft Excel 2003 with the statistical add-in tool pack Analyse-It ® Software, Ltd (Version 1.73).
Group comparison was performed using Fisher's exact test (Analyse-it for Microsoft excel version 2.03, Analyse-it Software, Ltd., Leeds, UK).
Correlations were tested using the software Analyse-it version 2.12 (Analyse-it Software, Ltd.
Non-parametric statistical analyses (Mann–Whitney U test and Spearman rank (rs) correlations) were carried out using a software programme (Analyse-it Software Ltd, Leeds, UK).
Statistics Statistical analyses were performed using the Excel add-in Analyse-it (Analyse-it Software, Leeds, UK) and Graph-Pad Prism (GraphPad Software, San Diego, CA, USA).
The above calculations were performed using Micrsoft Excel plus Analyse-It (Analyse-It Software, Ltd., Leeds, England).
Statistical evaluation The data were statistically evaluated using the Analyse-it software (version 1.62; Analyse-it Software, Ltd., Leeds, UK).
Data analysis Receiver operating characteristic (ROC) curve analysis was performed for tTau and tTau/PTau ratio with the statistical package Analyse-it (Analyse-it Software, Ltd.
Receiver operating characteristic (ROC) curves generated by Analyse-It Clinical Laboratory (Leeds, UK) were used to assess the utility of BNP as a diagnostic tool.
Statistical analysis Statistical analysis used Analyse-it software (Analyse-it, Leeds, UK).
Data were exported from Reconstruct and statistical analysis was performed using Analyse-It software for Microsoft Excel.
Data were analyzed using Analyse-it for Microsoft Excel (Analyse-it Sofware, Ltd., Leeds, England).
…statistics were applied via pair-wise applications of the least significant difference (LSD) calculation using Analyse-it software (Analyse-it, Leeds, UK).
Statistical evaluation of results The results obtained from the comparative study were evaluated using the Analyse-it Software (version 1.62; Analyse-it Software, Ltd, Leeds, UK).
Uterotrophic assay and proliferation experiments as well as retinoic acid measurements were analyzed using a one-way ANOVA with statistical software (Analyse-it Software, Ltd., UK).
…Neighbor Hydrogen Bonding (INN-HB) model ( 12 ) were obtained by multiple linear regression with the program Analyse-it v.1.71 (Analyse-It Software, Ltd., Leeds, England, www.analyse-it.com ) which expands Microsoft Excel.
Statistical analysis Microsoft ® Excel in combination with the Excel plug-in software Analyse-It ® v1.73 was used for the statistical calculations.
To compare histological data, the non-parametric Kruskal-Wallis test and followed by Connover's test was applied using using Analyze It™ (Analyse-it software Ltd., Leeds, UK).
Statistical comparison involved the Mann-Whitney U test and the Wilcoxon matched-pairs test with use of Analyse-it software (Analyse-it Software Ltd, Leeds, UK) for Microsoft Excel.
Statistical analysis was performed using Analyse-it for Microsoft Excel (Leeds, England, UK).
Statistical analysis Statistical analysis was conducted with the use of Analyse-it® statistical software add-in for Microsoft Excel (for Windows).
1 ); followed by statistical analysis, as above, using a one-way ANOVA (Analyse-It, version 1.72).
Statistical analysis was conducted using Analyse-it statistical software for Excel (Analyse-it Software, Ltd., Leeds, England, UK).
…individual nearest neighbor-hydrogen bonding (INN-HB) model ( 18 ) by multiple linear regression with the program Analyse-It v.1.71 (Analyse-It Software, Ltd, Leeds, England; www.analyse-it.com ), which expands Microsoft Excel.
Data were processed with Analyse-It Software, Ltd.
We analyzed the agreement of the three kinds of blood gas syringes for both ionized calcium and magnesium by Passing and Bablok analysis, linear regression analysis, and Pearson correlation using Analyse-it software (Leeds, England, UK).
Statistical evaluation of the results The results obtained from the comparative study were evaluated using Analyse-it software (Version 1.62; Analyse-it Software, Ltd, Leeds, UK).
Positive predictive values (PPVs) and negative predictive values (NPVs) were calculated at different cutoff values using Analyse-it software (Version 1.62; Analyse-it Software Ltd, Leeds, UK).
Statistical analysis Interrater and intrarater variability was calculated by kappa (κ) cross tables for ordinal variables in Analyse-it ® (Analyse-It Software, Leeds, UK) and presented with 95% confidence intervals (CI).
We use the Epi Info 2002 revised 2003 (Centers of Disease Control and Prevention – W.H.O, Atlanta, USA) and the Analyse-it ® 1.7 (Analyse-it Software, Leeds, England) programs.
…Hydrogen Bonding (INN-HB) model ( 64 ) were obtained by multiple linear regression with the program Analyse-it v.1.71 (Analyse-It Software, Ltd, Leeds, England; www.analyse-it.com ) which expands Microsoft Excel.
Data were analyzed and processed using Analyse-It software (Analyse-It Software, Leeds, United Kingdom).
Wilcoxon Rangsumtest for statistical analysis was performed using Analyze It™ (Analyse-it software, Ltd.
Method comparison was performed using Analyse-it Clinical Laboratory statistics module version 1.62 for Microsoft Excel.
Statistical analyses were performed using Analyse-it statistical software for Microsoft Excel [ 35 ].
…(Microsoft, Redmond WA) and Pearson correlations to the unamplified control were determined using Analyze-It (Analyse-It Software, http://www.analyse-it.com ), an Excel Statistics Add-on.
Statistics Nonparametric tests, the Mann–Whitney U test and Spearman rank correlations, were carried out using the Astute software package (Analyse-it Software Ltd, Leeds, UK).
Statistical methods For statistical analysis the Excel (Microsoft Windows 97) compatible Analyse-it program (ANALYSE-IT SOFTWARE LTD) was used.
Analyses were performed in Excel 2000 (Microsoft Inc., Redmond, WA, USA) using the Analyse-It statistical add-in (Analyse-It Software Ltd, Leeds, UK) and GraphPad Prism 3.02 (GraphPad Software Inc., San Diego, CA, USA).
Statistical analyses were performed with Analyse-it software (Leeds, UK) List of Abbreviations AID (α subunit interaction domain); BID (β subunit interaction…
El análisis estadístico se realizó con el programa Analyse-it (Analyse-it Software Ltd, Leeds, UK).
Se realizaron el test U de Mann-Whitney, el test de Chi cuadrado (con la corrección de Yates), y la correlación de Spearman, empleando Analyse-it (Analyse-it Software Ltd, Leeds, Reino Unido).
El análisis estadístico se realizó con Analyse-it (Analyse-it Software Ltd, Leeds, Reino Unido), con análisis univariante (correlación de Spearman, prueba U de Mann-Whitney) y multivariante (regresión lineal múltiple).
No papers match that combination.
Each title links to the paper by its DOI. The quoted sentence is taken verbatim from the published methods section. If you find an entry you believe is wrong, tell us and we will remove it.